View Full Version : Dan's L reg Td SX
Excellent work
I remember seeing it when it had wheels and the rest of the parts
When do you think it will be completed ?
If I said before the end of August would you believe me? Thanks :)
Wow! Keep it up Mr Dan!
Cheers mate
Primed the wings and Bonnet tonight. Not that happy with one of the wings. Need a bit more work, bonnet looks okay but might need a little more too.
Overall fairly stressed and ****ed off with bodywork!
Dan
guessing your the gent with the swiss army knife? good to meet u if so mate. nice thread. ive flicked through the more recent progress
Yes mate, I am. Nice to meet you too. :)
davidfox280585
12-06-12, 01:03 AM
be done in no time mate, really cracking on now,
hope to see it soon when its complete
Cheers Dave, I really need to take my time at this stage though as I want it as close to perfect as I can make it.
davidfox280585
12-06-12, 01:28 PM
i know mate,i primed richards van and flatted it down,were doing it outside i just started to paint it and it started spitting which i werent happy about,
so had to reflat the shell and primed today just got to wait for a nice day now
just not worth rushing
So annpoying working in the conditions we have to but never mind, I would love to see what i could produce if money was no object. Might have to start the lottery!
One loom...
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/575312_10150880286193775_1800117754_n.jpg
And then fitted.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/251879_10150880286498775_797909318_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/547280_10150880286708775_266555497_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/538151_10150880287268775_1392284692_n.jpg
I also hung the wings on too.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/196035_10150880285898775_1901244904_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/577587_10150880285458775_1655380294_n.jpg
Weather has stopped me doing any more though..
Dan
You not finished this yet Dan lollol
Na, shes certainly coming along nicely now mate. Look forward to seeing it finished :thumb:
I am slacking Kev but what I am doing I am taking my time over. Shall be done soon :)
I had a spare couple of hours today so I started to reasemble the car. What a lovely feeling after months of welding!
Fitted a few grommets first,
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/168895_10150884994963775_1377091784_n.jpg
Boost pipe hole.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/547228_10150884997673775_1716990653_n.jpg
Throttle leaver and Cable,
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/545014_10150884998613775_307236568_n.jpg
Heater matrix box,
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/575179_10150884999728775_1901636847_n.jpg
Clutch/brake assembly.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/182526_10150885001398775_1467426234_n.jpg
Relay plate for alternator.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/166094_10150885007493775_1903583844_n.jpg
Bonnet cable, and master cylinder mount.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/198323_10150885007808775_1385046016_n.jpg
Blower motor, and battery tray.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/550742_10150885008253775_277310509_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/547138_10150885008528775_41823812_n.jpg
Don't worry the SW bottle isn't staying.
That's all for now though,
Dan
ooooooooooow bits going back on :) this is the fun bit
ooooooooooow bits going back on :) this is the fun bit
Certainly is. Engine will be going in soon, Still waiting for the right time to paint it :)
looking good :) ready for Billing yes?
looking good :) ready for Billing yes?
Doubt it atm
http://www.youtube.com/watch?v=VZ2HcRl4wSk
Thank you for the highly positive video Connor but the simple promblem is it isn't in paint yet and I have no time atm to paint it. If all goes well it will be painted by a week on saturday. Dan
Ahh just trying to be mr motivator lol
http://awaaznews.com/wp-content/uploads/2012/04/mr-motivator.jpg
It'll get done when its done, no point rushing it to get it painted after all the hard work thats gone into it. It is looking wikid mate.
I preped these yesterday ready so I could paint them today.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/600373_10150886630458775_486083556_n.jpg
Then when I got in from work I fitted them,
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/198376_10150889047908775_44785259_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/224821_10150889048803775_393113054_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/484164_10150889049218775_1036232229_n.jpg
Came out pretty well IMO
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/598791_10150889049483775_1977996294_n.jpg
Next plan is to paint rack mounts, bolt that in, paint the gear box, fit the other brake pipe. Paint and fit the engine mount then fit it. :) Can't wait!
Dan
Wow,its starting to look like a car now dan lol
Yes she is Craig. Very slowly, hopefully get the engine in next week, then paint the removeable panels when ever I can find time.
If I paint it saturday I want everything ready to put windows etc back in on the Sunday/Monday :)
I'll be watching the progress mate :thumb:
Looking good chap :)
Thank you :)
I'll be watching the progress mate :thumb:
Shall hopefully be a lot more soon :)
Fitted a Battery today, and the rack.
I also messed about with other things but nothing big enough to put a picture up!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/168841_10150896637113775_1957373585_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/168503_10150896636623775_1326563248_n.jpg
Dan
looking good :) bolting things on is great isn't it
turbojolt
24-06-12, 09:25 PM
car is going to look really good when its all back together mate
deanwilko
24-06-12, 09:36 PM
Top work as usual dan one of the best wip's on here imo. With how it started off to what it is now
looking good :) bolting things on is great isn't it
Thanks, yes it is so fun :)
car is going to look really good when its all back together mate
Cheers pal.
Top work as usual dan one of the best wip's on here imo. With how it started off to what it is now
Thank you ever so much, that really does mean a lot to me!
Well tonight we have a fairly good update,
I preped the wings and bonnet.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/564080_10150898672603775_1520200920_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/548205_10150898673738775_1815802073_n.jpg
Sure you lot can see where this is going lol...
yeapp then I painted them!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/552495_10150898679943775_1446226139_n.jpg
Has a few runs on the top edge and a fly but I think I have enough paint on it to Da them out and mop it up :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/307020_10150898680108775_595688199_n.jpg
Runs and the fly :(
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/598741_10150898680398775_264334302_n.jpg
Wings
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/484480_10150898772848775_156029465_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/403952_10150898680183775_2023293885_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/564072_10150898680303775_1321832448_n.jpg
Photos don't make them look that good but I have to admit everything has come out well. I am happy with it, and after a good flat back and buff it should look the dogs!
Oh and I also bolted the mount on!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/382559_10150898673148775_674986647_n.jpg
Dan
Nice work Dan
When you painting the rest ?
Nice work Dan
When you painting the rest ?
My master plan is to prep the doors and tailgate tomorrow night, the doors need a lot of work though as they have a few dents! If I have enough time I want to high build them too. Then Wednesday I can flat them back and hopefully paint them white. Friday night I want to start flatting and masking etc, then put the Gazebo up. Finish everything on Saturday morning and paint! Now if this all happens I can then fit the glass and doors etc maybe Sunday night to make the car water tight.
We will see aye!
Cheers for the positive comment Edd :)
looks really good mate, bloody fly`s are a pain in the ass
looks really good mate, bloody fly`s are a pain in the ass
Cheers, the da will soon get it out lol
Pulled the wing outside to have a good look at them,
They have come out really well so that is a good start!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/314873_10150900513408775_2068045722_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/303673_10150900514193775_317636172_n.jpg
Shiney :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/252646_10150900567538775_1028626060_n.jpg
Had a look at the bonnet and noticed I have missed the very edge on the front so as that is also the same area where the paint run I am going to practice removing the runs without going through but as I need to spray the lip again is doesn't really matter if I do :)
Spent A good two hours on the passenger door, rubbed it all door inside and out then applied a smear of filler to cover a few minor dents.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/382468_10150900930598775_119957021_n.jpg
Flatted back, just needs the rest of the guide coat removing and its basically ready to prime.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/556019_10150900932343775_1735726704_n.jpg
Tailgate is ready to prime bar the spoiler holes need drilling.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/557187_10150900931243775_1714763334_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/539685_10150900930893775_477672035_n.jpg
Haven't started on the drivers door but I think its the best one so hopefully wont take as long. If everything goes okay everything will be in primer tomorrow night :)
Dan
I think the photos will do the talking,
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/531726_10150909126478775_479721099_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/522033_10150909126778775_206624940_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/562931_10150909127378775_402543714_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/487319_10150909128673775_1145713707_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/487343_10150909129143775_642710151_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/315358_10150909129373775_1723907973_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/283703_10150909129648775_1942225600_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/428860_10150909130008775_2128246274_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/563430_10150909133983775_1291856470_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/396162_10150909134048775_1157204836_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/425529_10150909134303775_1870013230_n.jpg
http://https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/483898_10150909134538775_2089125989_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/559240_10150909134978775_1142845309_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/582697_10150909135723775_1376372732_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/394741_10150909136078775_1839051831_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/251869_10150909136438775_1713032367_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/548371_10150909136748775_1073035986_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/313935_10150909137083775_1116906150_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/545278_10150909137448775_2037848070_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/480505_10150909137958775_323588701_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/582100_10150910078333775_2039412960_n.jpg
All I can say is there is 11 and a half hours work there, the paint work does have the odd run, some fly and slight orange peal but overall I am extremely pleased with the finish. and after a quick DA/wet flat and a machine polish it should come up like glass.
cossienova
01-07-12, 04:37 PM
Nice work fair play too u for having a go and getting very good results! You have given me a bit of enthusiasm to have a go at painting my 5 door td myself!
Nice work fair play too u for having a go and getting very good results! You have given me a bit of enthusiasm to have a go at painting my 5 door td myself!
Cheers Pal, I am sure you can do it!
Removed all headlining and fitted the new!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/528043_10150910959663775_2000900712_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/557699_10150910960443775_517493919_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/480773_10150910960583775_1874020353_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/564117_10150910960738775_1535978517_n.jpg
Then I quickly fitted the rear windows...
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/557800_10150911091668775_1020122580_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/529358_10150911094758775_1331802811_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/552392_10150911187743775_125917813_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/531232_10150911189353775_1574338193_n.jpg
Starting to look like a car now :)
Dan
top work dude :)
shel be bk on the road in no time :thumb:
looking good pall cant wait to see it finished.
rick
High builded a door and the tail gate tonight. Look okay i guess, good job it isn't gloss!
Fitted these today
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/544463_10150917420378775_1455100533_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/396650_10150917420848775_1166691825_n.jpg
and the wiper set up.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/548324_10150917422503775_946698038_n.jpg
I painted the sunroof surround as well but I managed to drag the air line through it thus ****ing up the paint,
I have ordered some more wet and dry as I am out of just about everything so I can finish off the doors and tailgate when it arrives.
So again not alot done today. On a plus side though I started a new job on Monday and everything is going well so far :)
Dan
I haven't done as much as normal the last week as I have just started a new job. Well today I came home from work and decided it had been to long so I thought I best make a start on a few things.
Masked and scotchbrited the front cross member.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/559192_10150929029068775_1355793002_n.jpg
After two coats of Hurricane grey.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/315309_10150929029338775_1488778211_n.jpg
and de-masked..
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/376528_10150929029743775_404042879_n.jpg
I painted it grey as it stood out like a saw thumb through the bumper and I am going for a 'Standard' look!
Sprayed the sun roof surround the same colour to match nicely with the hole white a grey theme!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/582202_10150929030323775_1071987030_n.jpg
And then fitted, it was bonded as well as screwed in so there no chance in it leaking!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/557063_10150929032263775_1057999331_n.jpg
The roof lining has also been cut, needs tucking in still and wants the seal putting on!
That is it for today though!
your gona come in your pants 1st time you drive it mate!
your gona come in your pants 1st time you drive it mate!
Nobby, why do you think I painted it white. :P
Can not wait to drive it though, my 1.0 Seat is starting to feel lively I have been driving it that long!
Oh I say.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/552728_10150930009123775_911757896_n.jpg
Finished the sunroof and the headlining now :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/483948_10150930119998775_1323551807_n.jpg
It has come out well imo.
Dan
scorge01
10-07-12, 04:44 PM
Just looked over this seems to be coming on really well and paint work looks really good for being done in a gazebo :)
looking good there Dan
Thank you :)
Just looked over this seems to be coming on really well and paint work looks really good for being done in a gazebo :)
Cheers pal, yeah paint has come up okay to be honest!
Dan
It was my Birthday yesterday, So when I came home to on Wednesday night I found this :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/553281_10150933901893775_1884222969_n.jpg
Got a few Nova related items to.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/479936_10150933869683775_272306574_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/559259_10150933869613775_1423448457_n.jpg
Today I rebuilt my front suspension so I could move the car,
Struts..
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/406194_10150936193603775_1031334642_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/426826_10150936193803775_217435017_n.jpg
And back on its own front wheels.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/532243_10150936194123775_1126100923_n.jpg
I have since removed the balloons :)
Dan
Managed to fit my windscreen without breaking it :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/380647_10150938839153775_699585152_n.jpg
I then fitted the new underlay and carpets, seat belts, various trim and finally the rear seats the passenger seat.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/558359_10150938838753775_1337856729_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/208826_10150938838563775_377923272_n.jpg
all in all we are slowly getting there :), Ice wiring next and then the Dash :)
Dan
Wow,it has wheels dan well done :thumb:
Nice work
I got them coasters mats for christmas lol havnt used them tho lol
Wow,it has wheels dan well done :thumb:
Thank you, they are only on to to move it though.
Nice work
I got them coasters mats for christmas lol havnt used them tho lol
Cheers Edd, my Nova one is in use as we speak :)
another couple of weeks and it will be finished :)
your flying with the rebuild buddy :)
another couple of weeks and it will be finished :)
It would be nice Sam.
your flying with the rebuild buddy :)
Yeah slowly getting through it :)
Getting there Dan. Top work :thumb:
I Pulled my self into gear tonight and painted a door, tail gate and spoiler.
Spoiler, held in place by an old tail gate!!
Note, the tail gate is rotten! Demister doesnt work and the rubber is knackered!!!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/425150_10150942722758775_1659409080_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/391368_10150942723283775_695456658_n.jpg
Passenger Door.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/482116_10150942724863775_1211047285_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/582001_10150942725363775_1564794164_n.jpg
And tail gate.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/375631_10150942726638775_1613718776_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/580990_10150942727263775_1700505184_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/396927_10150942727853775_96952616_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/529662_10150942732703775_950639112_n.jpg
My little friend wasn't very good at helping....
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320493_10150942733498775_502415744_n.jpg
Means I can fit them soon, now I just need to paint the grill, drivers door, wing mirrors, and the edge of the bonnet :)
Dan
Didn't know it was this far along, shows how often I look lol coming along very well, should see the road this summer!
My 1.0 Seat is starting to feel lively I have been driving it that long!
This worries me though lol I think i need to chuck you the keys to mine next time it's out lol
Thank you, would be nice to have it on the road soon :)
Fitted the painted panels today :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/3668_10150944483923775_1396686767_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/531396_10150944679228775_1503685487_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/561129_10150944678423775_441731590_n.jpg
She is most certainly getting there now :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/306626_10150944679728775_1845532635_n.jpg
Dan
Acerliam
17-07-12, 09:49 PM
Looking nice mate keep the good work up
So much win :) You're now at a stage where I can actually help lol seeing as you banned me from bodywork lol
Old man Jimbo
17-07-12, 10:41 PM
+ rep for doing such a good job. I love this kind of "back from the brink" jobs.
Looking nice mate keep the good work up
Thank you, I shall try :)
epic
:D
Thats looking top!
Cheers mate.
So much win :) You're now at a stage where I can actually help lol seeing as you banned me from bodywork lol
Thank you still need to paint a few bits yet, but yes certainly getting there!
+ rep for doing such a good job. I love this kind of "back from the brink" jobs.
thanks, means a great deal coming from some one like you :)
Dan
Well Lewis managed to get me some of these (SX seats), as I am trying to keep the standard look but want a sporty ride I will re trim the centres of these on to mk2 Sr seats.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/318765_10150952071013775_541754979_n.jpg
I fitted the front surrounds and window yesterday.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/217974_10150952537238775_1783473123_n.jpg
Bit of a ******* to fit nicely but got there in the end!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/315379_10150952538098775_1073271254_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/549473_10150952696598775_1654520537_n.jpg
Today I fitted the rear bumper and took the Gazebo down, I plan to re underseal the floor tomorrow and then make some brake lines :), High build the drivers door asap too. and then Paint that and the rest of the other bits. Should be a good couple of weeks coming up with lots achieved hopefully :) I would love it on the road in a month, so lets see what happens aye,
Oh and for you bike fans, I went for a spin on mine today :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/599884_10150954228718775_846921308_n.jpg
Dan
looking good mate
your doing some nice work
looking good mate
your doing some nice work
Thank you very much Stu
I had a clean 2006 headlamp with a chip in the lense so I decided to change it, stuck it in the oven.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/551203_10150954695128775_1538694495_n.jpg
kept checking after a minute but the lense wouldn't shift, in the end the rest melted first. still could get it apart either :(
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/3093_10150954695593775_408350998_n.jpg
what a ******* aye :/
I achieved another big goal for me today, finished the painting :)
a few quick snaps.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/389133_10150961870458775_1020346191_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/603518_10150961870043775_1438979149_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/564097_10150961869073775_1298749018_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/599984_10150961868893775_1224622448_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/422339_10150961868573775_609273080_n.jpg
Very happy with the results anyway :)
Dan
Fairly coming along now mate :)
Looking good mate :)
Fairly coming along now mate :)
Thanks guys!
Yeh shes coming along nicely mate, great to see you finally managed to get a set of sx seats aswell. Top work :thumb:
Yeh shes coming along nicely mate, great to see you finally managed to get a set of sx seats aswell. Top work :thumb:
Thank you, something you would think would be easy to find until you look aye,...
well I did manage to do a bit more before work. I fitted the drivers door to start with.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/205228_10150964089363775_1762996304_n.jpg
and the grey pillar vinyl. Didn't like this to much plus I put a small scratch in the door. never mind :(
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/251830_10150964089858775_428856082_n.jpg
Bonnet, does need blending in though as I only painted the front.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/378347_10150964090993775_1853725396_n.jpg
And just offered up these. Just the look I wanted :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/306759_10150964091333775_223181459_n.jpg
The car is now slowly getting dirty and dusty, really can't wait to get all the dirty jobs done and flat polish it and get some shine going. Need to seriously sort my parts out to as I have no idea where most things are, like the driver quarter light rubber, I have found two of them now and both have been the standard type :(
Any way. I shall finish off the vinyl, get the rest of the window bits in, regulators, wire in the central locking etc then have a good tidy up and do the engine, brake lines, fuel lines, tank and beam etc. I will worry about finishing the interior when its running and moving I think.
Dan
Well I finally finished fitting the drivers window today, I also fitted the mirror while I was there.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/388079_10150973015688775_678661926_n.jpg
I also started to buff the bonnet. Needs a little more but is certainly getting there!
Photo doesn't really show the shine :(
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/422301_10150973015998775_1492833635_n.jpg
Dan
nova_stee
31-07-12, 08:33 PM
Looking good whens it hitting the road?
Not to sure pal, hopefully soon though :)
NOV4_SPORT
31-07-12, 08:52 PM
Hey mate, that's looking really good keep up the good work
Iain
Today I finally made the brake lines. :)
Here you go :)
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-snc7/391183_10150977080968775_742946802_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/576182_10150977080458775_1286402986_n.jpg
And while I was underneath I fitted the fuel lines too.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/396017_10150977086738775_1502592699_n.jpg
I would like to get the tank on tomorrow, and maybe the beam on Saturday! We will see though as neither are painted yet!
Dan
Fitted the rear beam, set up the shoes, and wheel bearings. Fitted the suspension, fuel tank, the wheel then dropped it on the deck!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-snc6/185863_10150980405918775_244939910_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/268264_10150980406303775_1877684570_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc7/599582_10150980406668775_1644225815_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc6/185860_10150980407103775_1892768871_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/484601_10150981144158775_960616764_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc7/391245_10150981153303775_1217001682_n.jpg
Really getting there now!
Dan
nice to see it back down its wheels :)
Another update,
well I will let the pictures do the talking :)
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/404009_10150987601583775_1716604458_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/558449_10150988670323775_1550771951_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/549538_10150988670523775_549699035_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/430358_10150988671028775_1171337228_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc7/315419_10150988671328775_1623697207_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/378214_10150988671693775_1910199092_n.jpg
Bolted it all in etc in less than two hours :)
Dan
gary_126
08-08-12, 11:16 PM
The engine bay is going to look brilliant! keep at it!
The engine bay is going to look brilliant! keep at it!
Thank you :)
well I had a play with the boost pipes today, made the outlet pipe first, and also made sure the rest of the old one fitted okay. I also extended the waste gate actuator and mounted that!
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/409616_10150990637728775_192685350_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/392334_10150990638358775_579202814_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/530186_10150990639358775_1883951914_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc6/251861_10150990640538775_1074174992_n.jpg
Now I just need to make an oil return, water pipes and the rest of the normal bits and bobs!
Dan
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/304701_10150992660878775_1943477927_n.jpg
turbo is now plumbed in :) https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/315472_10150992661328775_805050994_n.jpg
very excited :)
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/599926_10150992661133775_143675226_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/315472_10150992661328775_805050994_n.jpg
Dan
this is sweeeeeeeeeeeeeet dan :thumb: top work buddy :)
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/315472_10150992661328775_805050994_n.jpg
NOV4_SPORT
10-08-12, 11:40 AM
Very nice mate, engine and the bay look really good always fancied a nova td
+rep
Iain
this is sweeeeeeeeeeeeeet dan :thumb: top work buddy :)
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/315472_10150992661328775_805050994_n.jpg
Thank you :)
Very nice mate, engine and the bay look really good always fancied a nova td
+rep
Iain
Cheers Iain, I have been in a 1.0 1.2 1.3 1.4 1.5 1.6 1.7 1.6vxr 2.0xe and a 2.5xe nova now and I still love the buzz my little derv gives me. Damn I didn't realise I had been in so many!
Dan
JordyzNova
11-08-12, 07:35 PM
very top work here mate loving this build and a quick question . . . . ive got a corsa td isuzu ive done the white ring mod,turnd the fuel screw up and put a boost controler on and a frmic but i bought 2.1/2 piping kit and my standerd turbo only boosts up to 1bar would you advise fitting a 3.0 trooper ?? thanks . . . .
http://i48.tinypic.com/1zzqg0p.jpg
i think im guna have to take a trip up to yours to have a look at this when its finished :)
very top work here mate loving this build and a quick question . . . . ive got a corsa td isuzu ive done the white ring mod,turnd the fuel screw up and put a boost controler on and a frmic but i bought 2.1/2 piping kit and my standerd turbo only boosts up to 1bar would you advise fitting a 3.0 trooper ?? thanks . . . .
http://i48.tinypic.com/1zzqg0p.jpg
Well mine ran 24 psi with similar set up. try taking the fuel plunger out and rotating it, move it so the fuel pin can travel the most. it is eccentric and you will work it out, mark the original place though :)
i think im guna have to take a trip up to yours to have a look at this when its finished :)
I think you should come to our next meet sam :)
Have a look at this guys :)
https://www.facebook.com/photo.php?v=10150995484863775&ref=notif¬if_t=video_comment
pikey1986
11-08-12, 09:11 PM
link no worky mate
Buggar, well it is a link of it running from my faceache!
This should work,
https://www.facebook.com/Yellow.Bellied.Novas
pikey1986
11-08-12, 09:19 PM
sounds and looks great, i bet you cant wait to have it finished and OTR?
pikey1986
11-08-12, 09:28 PM
daft question but have you built the engine aiming for a specific power or you just built it for drivability/reliability in mind?
daft question but have you built the engine aiming for a specific power or you just built it for drivability/reliability in mind?
When I first did all the modifications bar the turbo I knew the power was held back from the small turbo, I aim for a around 150bhp, may seem high but can still do things to increase the power. I understand that having such a large turbo may course me issues but I just hope it performs okay and the turbo does actually spool properly. Fingers crossed!
pikey1986
11-08-12, 09:48 PM
fingers crossed for you buddy :thumb:
whens your next meet dan?
Awesome work, really coming along now :)
whens your next meet dan?
We haven't actually arranged one yet, we'll set a date when we know the TD can make it, don't want to put too much pressure on the poor boy! lol
Awesome work, really coming along now :)
We haven't actually arranged one yet, we'll set a date when we know the TD can make it, don't want to put too much pressure on the poor boy! lol
Thank you, sounds good to me!
Well I fitted the radiator, alternator, loom and piping today.
I will just run it on water first to flush the system and check for leak and when I am happy I will bleach the header tank again and put some antifreeze in her :)
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/546664_10150999530058775_1060049940_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc6/200817_10150999531693775_1323087361_n.jpg
Needs a couple of pipes tieing up, a running fault sorting (sounds like an air leak in the fuel system) Gear linkage fitting, drive shafts, gear oil, and a few bits then the bay is done :)
Dan
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/400554_10150999532233775_1709679338_n.jpg
Very cool!!!!!!!
Thank you Amanda :)
Well I had an issue with the one of the old shafts, it was out of line from being welded (sleeve wasn't tight enough) so I got the local engineer to machine me a new sleeve and some shafts and I welded them together making sure it was nice and true this time.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/533216_10151003578213775_510920157_n.jpg
New above
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/559071_10151003581293775_1140388136_n.jpg
Not bad for an old boy!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/549662_10151003581523775_1261923147_n.jpg
Dan
reevie1987
15-08-12, 09:44 PM
top work looking really good mate:thumb: will have to get the lincoln meets going again get loads of us out like the old times
top work looking really good mate:thumb: will have to get the lincoln meets going again get loads of us out like the old times
Thank you but I didn't think you wanted to be part of the Nova culture anymore?
reevie1987
16-08-12, 06:50 PM
Thank you but I didn't think you wanted to be part of the Nova culture anymore?
still into them dude
Well just been to leeds to collect these very clean seats :)
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/424183_10151005741978775_144091321_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/402041_10151005742488775_110871527_n.jpg
No rips, no burns, all trim intact and have only covered 22k, I would say the rears have never been used looking at them. Just need the door cards now :)
Dan
karisma
17-08-12, 07:15 PM
Would those seats be anything to do with our fone call mr ball?
No, I have another set in worse condition that I want you to cut up. These ones are my minters!
Well today I fitted the OS brake disc and caliper,
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/422530_10151009003683775_1211741347_n.jpg
No pads fitted as I haven't got any yet :(
I made a front pipe which slots over the down/up pipe and joins the ashley system in nicely.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/556634_10151009003153775_1366411733_n.jpg
I removed the standard rolled tip and made this out of come scrap from work,
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc6/246878_10151008963668775_1266277612_n.jpg
Helps to keep the standard look in my opinion,
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc7/386947_10151008964463775_2043740602_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/431476_10151008964893775_776828418_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/418412_10151008965248775_1140367070_n.jpg
I need a two and a half clamp and a two and a quarter clamp now and a couple of rubbers then that's done.
While the back end was up I also set the hand brake up. Works a treat now :)
Getting there as they say!
Dan
looking good Dan, I like the exhaust tip, proper sleeper eh?
I really need to pull my finger out and un-ruin your door cards don't I lol
looking good Dan, I like the exhaust tip, proper sleeper eh?
I really need to pull my finger out and un-ruin your door cards don't I lol
Yeah exhaust is cool ta :)
Would be nice...
Today I fitted a new fuel filter, she now runs well :)
here is a quick poor quality video of her hitting 9psi.
https://www.facebook.com/Yellow.Bellied.Novas
I also fitted the rear seats and sorted a few other bits and bobs :)
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/319489_10151012913568775_1724082293_n.jpg
Lets see what tomorrow brings!
Dan
Played around with some electrics today, started by making a mini loom for the amp and radio.
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc6/603458_10151015040923775_346896000_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc7/405413_10151015041113775_1975551617_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/523236_10151015041958775_708210433_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/260516_10151015042253775_583074532_n.jpg
And into my old skool amp.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/578919_10151015042908775_1466851576_n.jpg
Speakers in, just running rears for now!
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/562874_10151015043303775_642987300_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc7/408184_10151015043813775_411765215_n.jpg
Sounds well, overall very happy with the results.
I then fitted the electric window loom, works and looks nice and neat so another bonus.
Next job, fit the dash and the complex alarm and central locking system. No so fun!
Dan
cracking stuff keep it up
NOV4_SPORT
21-08-12, 03:02 PM
The rears seats look minted mate, and I like the little boost gauge looks pretty factory mate
Iain
scott.parker
21-08-12, 06:03 PM
I like the route your going with this dude, its a good job you have done all round, as first time i saw you in it at PV few years back now, i think i said to you, about how you would need to do some serious work in the bay and on front end at some point, lol you could see it was getting rotten! but you have saved it well, and done a dam good job, im liking the idea of ice coming back around, think i might have to an install into the Loon..
cracking stuff keep it up
Thank you, I will be trying!
The rears seats look minted mate, and I like the little boost gauge looks pretty factory mate
Iain
The seats are as close to perfect as I will find. Very happy with them, thank you. Made the gauge a year or so ago now. I love how standard it looks too!
I like the route your going with this dude, its a good job you have done all round, as first time i saw you in it at PV few years back now, i think i said to you, about how you would need to do some serious work in the bay and on front end at some point, lol you could see it was getting rotten! but you have saved it well, and done a dam good job, im liking the idea of ice coming back around, think i might have to an install into the Loon..
Yeah, tbh the car had had it. Good job a like a good challenge. I wanted the addittional loom to be standard looking that's why I did it like that. You can't see it which is the main thing, Thank you any way!
Dan
Well I have now fitted my Remote Central locking and alarm, wasn't to bad to do with the dash out either.
Was extremly pleased to find that the new door solenoids bolt up in exactly the same place as the old Novas so all I need to do was fit the new solenoids on my brackets with my rods!!
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/527066_10151017207363775_2088795581_n.jpg
Not the best picture but you can still just see the new solenoid.
Wiring looks pretty tidy and all the controllers are hidden away nicely.
All I need to do now is fit the siren some where, not sure where though and wire in the hazards to the alarm.
Jobs a good one!
Dan
Not atm mate, shall hopefully be some tomorrow though :)
I spent a few hours removing the black paint off the dash and fitting it. It was a bit tight fitting it with all the added looms and alarms etc but we got there in the end!
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/554836_10151024979933775_891594284_n.jpg
Dan
I started today by fitting the exhaust with new hangers and clamps. No photos though but fits well and looks 'sleeper'
After that I fitted the new ignition switch, stalks and cowling around the column.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/300433_10151029416688775_1422291552_n.jpg
Then I fitted my amazing value aerial :)
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc7/378703_10151029417063775_1557863736_n.jpg
Picks just about every radio station up.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/408312_10151029417643775_1774513804_n.jpg
The starter has been temperamental recently and today it gave up on me, I tested it and found the motor to be at fault, after stripping it I found this.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/553758_10151029323018775_1267024328_n.jpg
The brushes were full of rubbish as were the armature so I cleaned it up with sand paper and thinners regreased and reassembled. Works a treat now, just need to fit it :)
After that I fitted the N/S driveshaft and the brakes, then bleed.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/556396_10151029322773775_548274366_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/561702_10151029418253775_1219539075_n.jpg
Quick pic,
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/551572_10151029418713775_948770260_n.jpg
That is about it really, will do abit more tomorrow after work!
Dan
Getting there fella, your progress seems to be like mine. Just getting out for a bit each evening to get a little bit more done :d
Looking good though mate :thumb:
Getting there fella, your progress seems to be like mine. Just getting out for a bit each evening to get a little bit more done :d
Looking good though mate :thumb:
Its the only way when you work full time, I try and spend a few hours on her in the week and the same again on Saturday. Will insure her soon then I can test drive :)
Where did you get your ariel from mate? Got a link pretty please :)
http://www.ebay.co.uk/itm/CAR-AERIAL-WITH-AMPLIFIER-BOOSTER-WINDSCREEN-ETC-/150889202372?pt=UK_In_Car_Technology&hash=item2321b282c4#ht_500wt_969
There you go!
Well I have been and bought some goodies. Photos to come,
Mint Gutter trims,
Mints grey interior trim, door pockets, door handles, kick panels, sill covers, Dash and glove box, under trays.
Black plastic seat runner covers,
Standard rear springs,
Side repeaters,
Sun visors and maybe more,
Gear gaitor and knob!
I removed all the items from a near perfect 33k miami blue spin, all I need now is to source a grey centre console.and I have everything I need to make my Nova's interior shine like a new one.
I will also be having a mass clear out as I now have a lot of un wanted interior bits. Still a few Gsi bits. Its all going on the bay except a couple of things and if it don't sell in the skip!
That's it though for today.
halfords allso sell those aerials,
i've used them on nova's before but fitted them behind the dash
above the glove box on the mk2 dash, works spot on as well
great work as usual dan
stu
http://www.ebay.co.uk/itm/CAR-AERIAL-WITH-AMPLIFIER-BOOSTER-WINDSCREEN-ETC-/150889202372?pt=UK_In_Car_Technology&hash=item2321b282c4#ht_500wt_969
There you go!
Legend, bought one for the new daily, just what im after.
(rep if i can)
Not a bad idea as I don't really like seeing the wires.
Cheers, I really can't wait to give it a good clean though. It looks horrible at the minute.
halfords allso sell those aerials,
i've used them on nova's before but fitted them behind the dash
above the glove box on the mk2 dash, works spot on as well
great work as usual dan
stu
Well today I booked it in for MOT,
As promised the parts I got the other day, only bought the door cards for the mint pockets.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/405862_10151034707958775_823296174_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc7/480084_10151034708488775_384331258_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/547263_10151034706693775_1446465713_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/304994_10151034705888775_1495834076_n.jpg
I fitted the standard gear gaiter and a four speed knob just for ****s and giggles!
Side repeater was fitted then on with the kick panels.
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-snc7/3690_10151034760798775_958444337_n.jpg
Glove box,
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/547117_10151034761258775_1183695595_n.jpg
Door cappings and the door cards. I will be swoping the actually cards for lewis' Sx ones when he pulls his finger out and give me them!!!
Just a couple of the outside to.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/6073_10151034843348775_459520081_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-snc6/228473_10151032850133775_2083749933_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/199026_10151032850038775_1087183991_n.jpg
Dan
so close now :) I'm very much looking forward to MOT'ing it lol
I'll sort the door cards out over the weekend, and I found your seat rail covers in the back of my Nova too
Dan has forgotten to mention quite a big detail...
Update this you gayer! x
Okay so big update, yesterday it went for MOT. Lewis from here kindly tested it for me and helped me set the head light up etc. Any way it passed once the headlight had been set up.
On the lift
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/s720x720/310444_10151043928828775_1837366115_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/s720x720/292975_10151043928613775_353962282_n.jpg
Then after I finished work we met up at the local meeting point..
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/546317_10151043929328775_2011539024_n.jpg
All in all it drives fairly well and seems to go pretty good to.
Today I set about the tail gate with the DA and a mop..
Poor photos I am afraid.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-snc7/423762_10151043929188775_173011193_n.jpg
Fitted the badges
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn1/563191_10151043929678775_1330211829_n.jpg
The paint looks dull in the photos, it really isn't though :(
Bonnet badge.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc7/3833_10151043929488775_1727151956_n.jpg
And at work earlier.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/548051_10151043929978775_1927253223_n.jpg
Right well I have a few more plans for her now. After using the new turbo set up I have noticed a few things. One its a little laggy but does pull very strong to around 5200 rpm and the other is the engine runs much cooler under hard driving. I am achieving 20 psi in 3rd 4th and 5th and the temperature gauge barely moves which is fantastic as it used to go sky high. My only issue is like I say it is a little laggy. I have since found out about a slighty smaller turbo I can directly fit on to my set up and try out. Should solve the problem, why I am there I can fix my slight oil leak from the return to. All in all I think it was worth trying and once I sort out the turbine A/r I think I will have a very lively little Nova, even now its fairly damn quick for what is.
I will keep you all updated once I manage to source a turbo. Next job for me is to clean it all up and finish the mopping and pretty much enjoy it :)
Dan
reevie1987
08-09-12, 08:38 PM
good good glad to see the boys are back on the road again now we need a png lincoln meet again
nova_stee
08-09-12, 09:00 PM
Good to see it done you should be very proud youve put some proper graft in to it
Brilliant mate, glad its back on the road and looking good. TOP WORK :thumb:
That's looking very nice
All your hard work has paid off
good good glad to see the boys are back on the road again now we need a png lincoln meet again
We are having a YBN meet next weekend.
Good to see it done you should be very proud youve put some proper graft in to it
Thank you, yes its so nice to have on the road tbh.
Brilliant mate, glad its back on the road and looking good. TOP WORK :thumb:
Thanks kev, still a lot more to do though.
That's looking very nice
All your hard work has paid off
Thank you once again. I just love driving her!
Looking good, can't wait for next Sunday, first time they'll have been at a meet together for over a year!
Bout bloody time you pulled your finger out and finished this lol
camels toe
16-09-12, 11:58 AM
Would you guys be interested in tagging along to the retro-rides lincs meet last sunday of the month?
Looking good, can't wait for next Sunday, first time they'll have been at a meet together for over a year!
Ta, she will hopefully be clean by next weekend with all the nice bump strips etc :)
Bout bloody time you pulled your finger out and finished this lol
Lol, full bare shell restoration in under a year. Not to bad really :)
Would you guys be interested in tagging along to the retro-rides lincs meet last sunday of the month?
Could you give me some more details please?
Still took ya time though wench :p
camels toe
16-09-12, 01:33 PM
Were just trying to sort it out at the mo.Looking at either the 30th of this month or the 1st sunday of october at-
The Motortown Coffee Stop
Brentwood House
Lincoln Road
Faldingworth
LN8 3SF
It`ll be the first meet but there seems to be alot of people from lincs so could turn into a decent meet.The threads in the events and meets section on retro-rides.
Well I have actually made my car stand out from the crowd now by adding the final finishing touches, what do you lot think?
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/304333_10151056461613775_604941799_n.jpg
Were just trying to sort it out at the mo.Looking at either the 30th of this month or the 1st sunday of october at-
The Motortown Coffee Stop
Brentwood House
Lincoln Road
Faldingworth
LN8 3SF
It`ll be the first meet but there seems to be alot of people from lincs so could turn into a decent meet.The threads in the events and meets section on retro-rides.
I am in, I will ask a few others too.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/562020_10151056562883775_792908785_n.jpg
Waxed the car today, then I took it for a spin and got a few photos.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/532091_10151064056088775_1594451391_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc7/578380_10151064056688775_1967891934_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/580403_10151064057003775_117730943_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/563934_10151064057528775_1276168683_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/301239_10151064058703775_811584973_n.jpg
She is now just about finished. I want to do the ode little job to get it 'right' but other than that I have done it :)
I intend to remove the front bumper and rad next week to investigate an oil like I have, and I also have a cleaner dash to fit some time. Wouldn't mind a new bumper to as mine has seen better days now.
Dan
Well I have done 800 miles in her now. A few problems have occurred since being on the road that I now intend to fix. Mainly being various leaks etc.
Well I knew I had a oil leak and a small water leak from the turbo so I investigated further.
I removed the rad and intercooler set up. One of the main plans was also to remake the exhaust and remove the intercooler. Main reason is its a little laggy and always has been with the intercooler set up on so as I have the pipe work etc I am going to risk running with out one to see if its any better.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/416973_10151085822693775_1379340515_n.jpg
So I found a slight oil leak from the turbo return, and the rocker cover. Lovely job :) and a water leak for the bottom hose housing.
Then I set about removing the unwanted bits of exhaust that were simply getting in the way.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/404595_10151085822983775_1174092376_n.jpg
Mocked up the new pipe set up.
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/r270/545744_10151085823288775_1961429759_n.jpg
I then set about making it work.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/22617_10151085823443775_546331384_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/548808_10151085823748775_1616826424_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-snc7/420795_10151085824318775_860927992_n.jpg
Perfect and there is a lot more space for the water/ oil pipes for the turbo now and I can still make the exhaust work relatively easy.
Cleaned and painted.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-snc7/430026_10151085868983775_1350651863_n.jpg
and a quick polish of the other pipe.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/404603_10151085869178775_545470356_n.jpg
I will hopefully finish the exhaust tomorrow :)
Dan
remember the difference it made when you first fitted an intercooler though. I think this may be a backwards step. I think the lag may be down to an enormous turbo on a little diesel lol
JordyzNova
15-10-12, 10:58 AM
i ran mine with no cooler on a standerd 1.5td with white ing mod and boost controller and i was gettin heat soak on full boost so just watch it doesnt go pop pal
NOV4_SPORT
15-10-12, 11:06 AM
Looking good mate, keep up the good work !!
Iain
+rep
remember the difference it made when you first fitted an intercooler though. I think this may be a backwards step. I think the lag may be down to an enormous turbo on a little diesel lol
as I said last night it only made a difference because of how restricted the set up was.
SeXy Nova! :)
Cheers :)
Looking good mate, keep up the good work !!
Iain
+rep
Thank you :)
i ran mine with no cooler on a standerd 1.5td with white ing mod and boost controller and i was gettin heat soak on full boost so just watch it doesnt go pop pal
I have experienced both with and without. With the standard 1.5 turbo it never needed one.. I don't care who says it does!
With the 1.7 turbo I only fitted one as the original 1.5 boost pipe wouldn't fit properly, there for extremely restricting it like I said to Lewis. When I then fitted the top mount which wasn't laggy at all everything was great even through it didn't work that great, I then made the front mount set up and had to make the pipes something like four foot longer which had a noticeable effect on the lag and dropped the boost pressure by 8 psi, Now I fitted the T25 turbo with the front mount the lag is still there, This is why I have removed it. It hasn't cost me a penny and worse case I could change it back but I do not think you really need them still because yes the I/C worked a bit but it still doesn't stop the heat soak from the engine on the manifold this is why I think its a waste of time. I predict overall it will be better but a little worse under prolonged thrashing. If I am wrong I will change it back.
Any way the turbo is now currently being rebuilt and today I have spent the morning sorting a couple of teething issues and polishing bits and bobs. Hopefully the turbo etc will be rebuilt and ready for a test next week.
Dan
Oh forgot to update the other day, the exhaust is now done.
Added this bit.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/1019_10151087340173775_936368399_n.jpg
and then this bit.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/554337_10151087340978775_1013508642_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/12733_10151087340628775_713607005_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/548131_10151087341308775_1941964945_n.jpg
Then made this bit.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/183471_10151087341893775_493252080_n.jpg
Mocked up.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-snc6/190337_10151087342598775_446614677_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/644624_10151087343183775_1929472717_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-snc6/247259_10151087343763775_703266945_n.jpg
And the finished product.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/545570_10151087345943775_396829464_n.jpg
All I need to do now is wrap it again.
Dan
gary_126
15-10-12, 02:19 PM
Looks great!
The front bumper will come back with a heat gun. (i did it on an early corsa b bumper that was so faded it was white, came back like new)
I will try it Gary. Thank you :)
supernova.629
16-10-12, 12:36 AM
How menny l reg novas was made you only see a few cum up now and again
Might be worth running a small intercooler like a standard C20LET one? iirc they are the same as the ones fitted on 1.7td
How menny l reg novas was made you only see a few cum up now and again
Not sure, but they were mainly vans. I have a list of most of the diesels left on the road. IIRC there are 3 L-reg diesels left and only one SX (mine :) )
Might be worth running a small intercooler like a standard C20LET one? iirc they are the same as the ones fitted on 1.7td
I will see what happens, main issue is I only have 270mm by around 150mm space
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/47919_10151095420193775_639181035_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/424712_10151096919253775_1849679563_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/480386_10151096921343775_1708535333_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/269470_10151096921598775_16301008_n.jpg
Looks Nice! Do you measure the performance when it's done?
i love this dan keep it up.
Rick
Not checked on this for a while, looking good chap! Good to see it's running.
Looks Nice! Do you measure the performance when it's done?
I will have it on a dyno soon. It made 104bhp the other year. Hoping for 130bhp next year :)
i love this dan keep it up.Rick
Thanks pal :)
Not checked on this for a while, looking good chap! Good to see it's running.
Thank, just wish I had the time to use it more. only been to work and and back in it really. May go out somewhere this weekend if its done :)
Well it is back together and works a treat, I have gained 5psi. It boosts 3psi more at 3000rpm, it is less laggy, and I have given it serious abuse the last few days and had no problems with heat sink. I can still touch my hand on the intake pipe and the inlet manifold is still as hot as before. So overall a very worth while mod :)
A couple of nearly finished pictures.
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/3738_10151099876773775_1516251548_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/32292_10151099876503775_8186884_n.jpg
Dan
okay having been for a ride yesterday, I accept that it does seem to work! even as a passenger it's noticeably less laggy :thumb:
Surely not after all your hard work?!
I am constantly trying to make it faster. I just wants leaving how it is, I need car I don't care about so much so I can just make it go fast etc. That is why I have bought Stupots loon!
I have had the car four years in may, Just a little bored of it and enjoyed making it more than using it!
Dan
At least you have got another, good man
How long before you start making the loon go faster tho? lol
At least you have got another, good man
How long before you start making the loon go faster tho? lol
Not long as he has been asking about equal length shafts in the for sale section (even though the post above his in the thread stated the shafts were already sold :roll:)
At least you have got another, good man
How long before you start making the loon go faster tho? lol
Already on it, but the difference is the saloon is already tidy. Just need a new heart!
Not long as he has been asking about equal length shafts in the for sale section (even though the post above his in the thread stated the shafts were already sold :roll:)
Never noticed. My bad!
nova_stee
03-12-12, 09:38 PM
Is the loon going let
Maybe V6, Lets are too dear! I am trying to buy a house and I don't wont two mortgages lol.
Is a real shame your selling this after all your hard work mate! I know where your coming from though, needs must though so onwards and upwards as they say :)
As i said before, hope it goes to a good home after all your effort being put into it, and i cant wait to see progress in the loon :)
ivauxhallkyle
12-03-13, 07:44 PM
hi mate the pic are not working
TOZNOVA81
02-09-14, 12:46 AM
Just put KET into dry storage to be stripped back to shell again.
Will start a thread on her progress soon :D
paddy235
02-09-14, 06:05 PM
Get a thread up mate nice to see another nova local
TOZNOVA81
19-04-15, 02:07 PM
She's still alive :) currently undergoing some structural work on the front end. http://www.pngclub.com/forum/showthread.php?208596-Project-Hungovernova-KET
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.