Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Engine warm-up, how long ?

  1. #1
    3 1/2 rods.
    Join Date
    Feb 2004
    Location
    Lancaster Drives : 1.6 8v T40
    Posts
    5,975
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Engine warm-up, how long ?

    I decided to take good care of my new engine. May sound stupid but how long exactly before the actual engine temp is up ?

    I usuall leave it a mile or two down the road, let the water temp reach the first bar on the digi-dash and let the heaters get hot. Before taking it anywhere near 3k

    I am aware that the water-temp doesn't really have a true indication of how hot the engine is

  2. #2
    Senior User
    Join Date
    Nov 1999
    Location
    St. Asaph Drives: Honda S2000 Drives: Passat TDi Drives: 106GTi Drives: 106XLD Drives: Swb Transit
    Posts
    6,986
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    i limiter mine out of my drive

  3. #3
    Club Member ade's Avatar
    Join Date
    Mar 2002
    Location
    Glasgow Wears:A Skirt
    Posts
    10,822
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    mine used to take about 3 miles averaging 30-40mph...

    the temp gauge use to rise to 1/2 way then the thermostat would open and it would drop to 1/4 line - then Id floor it!



    :twisted:

  4. #4
    P N G Adam's Avatar
    Join Date
    Nov 2003
    Location
    Stoke-on-Trent
    Posts
    30,497
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    LMAO at Ste.

    Oil temperature is what is interesting.
    Oil takes around twice the amount of time that coolant does to reach temperature.
    I'd say the oil wouldn't reach full temperature to probably around 7-10miles of driving.
    A good indicator is the oil guage on gsi clocks, when the pressure is low(under half) at tickover then IIRC thats a good sign that the oil is nice and warm.

  5. #5
    Bzzzzz Admin Jack's Avatar
    Join Date
    Apr 2003
    Location
    Hicksville, GL
    Posts
    44,173
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default

    I just normally keep the faff under 3krpm until about 10 mins or so after the water has got up to temperature, or the oil level warning light has gone out... damned dodgy sensor

  6. #6
    3 1/2 rods.
    Join Date
    Feb 2004
    Location
    Lancaster Drives : 1.6 8v T40
    Posts
    5,975
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I have an oil pressure guage, and sendor, but havn't wired it up yet.

    Well i usually wait for the heaters to get hot, whihc is a while after the water temp is up . so that's all ok then

  7. #7
    Senior User
    Join Date
    Jun 2003
    Location
    Bristol
    Posts
    2,468
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I don't take my omega above 3k until the engine temp reads about 90 degrees or just under. The oil warms up failry quickly on the V6's aswell because the oil cooler is located in the middle of the 'V'. A friend of mine pretty much ignores oil/engine temp when taking the revs up, even after numerous warnings from myself

  8. #8
    Bzzzzz Admin Jack's Avatar
    Join Date
    Apr 2003
    Location
    Hicksville, GL
    Posts
    44,173
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by dunova
    A friend of mine pretty much ignores oil/engine temp when taking the revs up, even after numerous warnings from myself
    Mmm, a friend of mie does that to his GTi6 - 6-7k from cold and he wonders why he* had to spend ?3k+ on two engine rebuilds!!

    *for "he", read "his parents"

  9. #9
    Dislikes stupid people
    Join Date
    May 2003
    Location
    Nottingham
    Posts
    11,405
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    i limiter mine out of my drive
    pmsl yep all my shitters had that treatment

  10. #10
    chippy shoulder Admin
    Join Date
    Nov 1999
    Location
    Crowland, The Dirty North
    Posts
    35,414
    Post Thanks / Like
    Mentioned
    18 Post(s)
    Tagged
    0 Thread(s)

    Default

    the 205 warms up nice and fast now ive got a smaller rad in there .

    id just make sure you have oil pressure and thats all that matters

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •