Whilst it was up on the ramp I also took the chance to drain the oil, fit a new magnetic sump plug and oil filter and plumb in my oil cooler with the thermostat sandwich plate. I also got some decent quality brackets and got the oil cooler mounted up too.
And a couple of cheeky pictures...
Luckily, I've got over Easter off so I've made up a list of things to do before it goes into paint. These include painting the rear beam, fuel tank, arches and brakes. Filling up with new oil and water/antifreeze (and get it running after 5-6 months!), making up new fuel tank hoses, painting the exhaust and lots of little jobs.
The other night I removed the tie bars, bottom arms and removed the bushes today ready to send off for powder coating. When I get them back, I'll get them fitted along with fitting the new poly bushes and track rod ends/tie bars/bottom ball joints.
I'll report back tomorrow with how it goes! Hopefully I get a fair bit done as I've only got about 2 and a bit weeks to get it all done!
Looks great Liam! Look forward to seeing it done
Your progress is miles ahead of mine.
Nice work
Your tank strap is ruined tho
Noticed that as wellOriginally Posted by Edd
Nice work
Your tank strap is ruined tho
looking very very nice though Liam, so what's next to do once you've got it running? Any other improvements or parts your putting on.
Cracking looking car now and enjoying your progress on this
Cheers guys! It's a bummer with the tank strap. Hopefully I can straighten it out a little bit. I only done it moving it from one workshop to the other and forgot they dragging on the floor!!
Southie, once it's all done and everything is fitted I shall be stopping for a while. I'll be getting it featured in Total Vauxhall once it's done and then start saving for an E30 BMW. Once my finances change though, i'll start looking at throttle bodies which would complete my 'plan' for the Nova.
This looks nice , grate build there .
Looking very tidy.
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
Cheers guys! Managed to get a little bit done today.
Yesterday I painted the fuel tank so today when it was dry I replaced the old, split fuel filler pipes with some fluro silicone hose.
Then today I removed the rear beam...
...And fitted the fuel tank and filler neck.
And then set about painting the rear beam.
I'll finish off painting it tomorrow and tick off some more jobs that need doing! I've ordered everything to do a secondary rear ARB including a Cavalier ARB so will fit all of that when I get them before I fit the polybushes and refit the beam. I also gave the exhaust a quick paint up in high temp paint so will get that fitted back up tomorrow and hopefully get it back running!
hope fully you can make it to the BHP show mate, i will definitely keep an eye out for this little beauty.. good work lad
Posting Permissions
Reply With Quote
