Edd's Nova Sport

[craig green]

I bet corsa A LHD brakes are awesome due to not having that bar

Thats a bit of an exageration. Maybe marginally better, remember how pish-poor standard Nova calipers are!
I say do the pedal conversion so long as you do it right, reinforce the bulkhead join, shorten the pedal nicely & make a really tidy effort re-routing the brake pipes.
If you keep the hole of metal that gets cut out, it could always be welded back in place, LOL.

[Benn]

Opinions please people

Seriously considering a corsa B servo conversion due to wanting to free up space in engine bay for AFPR, oil catch tank and vacuum manifold when I fit the turbo stuff

BUT if you were me would you really want to cut a hole in a MINT battery tray for the servo conversion?

FPRs can be hidden nicely if you plan it out, look at mine. Oil catch tank? What for? Run it back in and let the engine breath how it was built to.
No to cutting the big hole. Just plan everything out and it will work. I offer any help i can give.

I could but it's going to start looking messy I reckon, pipes going everywhere etc

Plus that crap brake linkage bar thing behind the dash is a shocking design, I bet corsa A LHD brakes are awesome due to not having that bar

See above and yeah they must have great brakes.

[stt]

Don't cut the pedal if you go the corsa b route, shorten the bracket the pedal sits in and then just straighten the pedal, otherwise the pivot point will be way out and the pedal ratio will be all to shot
Come and have a look at my nova to see what I mean

Have you considered a different master cylinder in the stock location and perhaps use the servo that accompanies the master - or fabricate something and then run a remote servo?

Ive got plenty of vehicles you can come and try different thing off

I use a 406 master cylinder and servo on my mi16 - perhaps that's modifyable

[Edd]

Craig popped round yesterday with the Courtenay rear springs

Got them fitted, lowers the rear by 25mm, looks so much better
A so fitted genuine Nova rear mudflaps



It's SORN'd now as well but still lots happening over next few months

[Royston]

Looks nice Edd!

[Acerliam]

Looking smart mate!

[NOV4_SPORT]

Looking good Edd very cool and the stance looks good

Iain

[dannymcc]

Looks very well Edd, can't wait to see it with the decals on.

[scott.parker]

Loads better dude

[Edd]

Looks nice Edd!

Thanks Royston

Looking smart mate!

cheers mate, yours is looking nice as well

Looking good Edd very cool and the stance looks good

Iain

nice one mate, yep looks a lot better now

Looks very well Edd, can't wait to see it with the decals on.

Cheers Danny, i have started fitting the decals now, had to get a new drivers door decal tho as i think like a few of them it was made 4mm to short

Loads better dude

It is mate, front coming down 10mm next with some FK spring seats, then i think the height will be perfect then

Edd