brucers GT/LET wip.

[brucer]

How is the wiring from the position it comes out the firewall? I've seen them gauges on rspec.com (iirc). Great progress as usual.

its ran in the most awkward way!!! ive got it runnign through this capping on the firewall



right behind that capping is the brake pedal gubbings, it is the worst place imaginable to get it to fit (especially when you got to squeeze inside between the cage and the seat to get in the footwell) but its effective.

those gauages are similar.

Looks really nice. That engine bay is a work of art!

cheers buddy

Where did the oil pressure fitting come from please? Car looks excellent btw

ebay, type in m14 x 1.5 to 1/8 and it will bring them up. only problem is, is that the 1/8th sensor has a long protruding end (like a coolant sensor) so it cant be screwed in that far to seal. ive used ptfe tape and hope it doesnt leak. the other option is to have one that screws directly into the end but then you cant have additional items like the pressure sensor, unless you use the other oil gallery above the pressure senders standard place.

I love this nova love the colour, that engine looks amazing with the grey top

thanks, inspiration from numerous other WIP threads help with choices of colours.

[Edd]

Glad my wiring routing idea is being put to use

Looks cracking mate

[Nick J]

Looking very nice fella.......... The only thing I would do is paint/powdercoat the boost pipework and tophat. Doing this will only make your bay look even more minimalistic which I know was a look you were after with the wiring tuck and so on. Just a thought! Could look tidy all grey same as the rocker cover etc.

Nick.

[brucer]

Glad my wiring routing idea is being put to use

Looks cracking mate

yeh and i hate you for it! the pain i was in getting it through the hole.

Looking very nice fella.......... The only thing I would do is paint/powdercoat the boost pipework and tophat. Doing this will only make your bay look even more minimalistic which I know was a look you were after with the wiring tuck and so on. Just a thought! Could look tidy all grey same as the rocker cover etc.

Nick.

i was thinking about this, when i fitted the nice shiny pipes i liked them, then 4/5months with out doing anything to it and looking at them i was unsure if i liked it any more.

watch this space

[Edd]

yeah is a tight squeeze hides it all tho

[scott.parker]

Thats looking smart mate, another quick question for you, what wiper set up is it your running, and wip process of the fitting etc?

Scott

[brucer]

its from a corsa b, you have to cut down the main length of it all as it wont fit in the nova holes, you have then got to cut down one of the bars that rotate off the motor. its still in progress but 90% complete.

benn has done it to his and has said it doesnt clear the screen correctly due to the angle the stub bits come out the scuttle. im yet to deal with this though, they also stick out further than the nova ones also.

one thing to consider is if it will miss the battery, fortunately my battery has a cut out in a very good place to miss the rotating arms.

hope this helps, can get pics if you'd like.

[The Simps]

Its nice to check in here from time to time to see this getting better & better! Engine bay looks lurvely...

[krobinson]

Love this longtime!!!!

[Nova_Tek]

its ran in the most awkward way!!! ive got it runnign through this capping on the firewall



right behind that capping is the brake pedal gubbings, it is the worst place imaginable to get it to fit (especially when you got to squeeze inside between the cage and the seat to get in the footwell) but its effective.

those gauages are similar.

Do you remember what size hole you drilled to get the loom grommet to fit properly? Having the loom come out from that point... does it reach round to all the sensors ok?

Also, how did you manage to move your radiator over to more centre? I need to do the same in order to allow for the FMIC pipe work.