Engine mounts:
There are ways of using the Nova mounts to install the 2.0 lump, but it can be more hassle than it is worth. There are 3 enigne mounts in a Nova, only 2 or them needs modifiying or changing. First off is the drivers side (off-side) engine mount bracket needs to be lowered by 1.5 inches, then the rear mount need cutting in half and re-welding. This method works but puts the engine too far forward and can complicate other things. The highly recommended option is to fit some specialised mounts (i.e. from CarQuip - ?50), these are modified to give the engine a good position and look better too. Also fit new engine mount rubbers all round if the old ones are worn. The near-side needs no modification and can be alone left as is.