Nicks x18xe1 build (PBpatched)

[totalnova]

Just adding the little cosmetic bits.
Picked up some window trims yesterday in really good condition.
Before



After



Just the skirts and spoiler to fit now.
Nick

[millworm]

Sweet, window trims smarten it right up

[totalnova]

Wish it would stop raining so I can get out and drive the bloody thing

[millworm]

Same here mate, not driven my fiesta prorperly once this year since i got it out of storage

[totalnova]

So, change of plan engine wise, I need some turbo noises in my life so I'm in the process of fitting a z20let into the car.
I'll update the thread properly later with pics

[totalnova]

So first job was to remove the old engine, I've done this plenty of times so it didnt take too long.



I've also been getting my new engine ready.
I've had the head off and given it a freshen up.
Also the turbo has been rebuilt as there was some play in the shaft







I've also been getting the car ready for the conversion, I needed to make space for the alternator so cut out and plated up the chassis leg



plus I've been gathering all the parts I'll need like conversion shafts, Hockly Machined Knuckles and coolant and boost hoses.



One thing I did have to do was cut down the tread on the cv joint as it was too long.



and I've modified the gearbox mount and added a gusset to the conversion mount as they can be a bit weak.



Next jobs before I get the engine fitted is to mount the electric throttle pedal, just need to mount a bracket to the firewall.

Nick