Results 1 to 7 of 7

Thread: C20let won't start

  1. #1
    User
    Join Date
    Jun 2009
    Location
    scotland
    Posts
    220
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default C20let won't start

    I put an up rated fuel pump on my car it's getting fuel no problem and relay is working , I had all wires off alternator due to doing work to chassis leg now put it back together and it's not sparking at all, no eml on dash ether ecu was hot when I felt it could it be that ? Any help appreciated

  2. #2
    Senior User Club Member
    Join Date
    Apr 2003
    Location
    South Wales
    Posts
    6,566
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    ECU not getting a feed from the relay ... I very much doubt you're getting fuel if you're not getting eml with ignition?

  3. #3
    User
    Join Date
    Jun 2009
    Location
    scotland
    Posts
    220
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I slacked the feed going into the rail defo fuel pissed oot so defo fuel there, do u think i should change pump back to how it was to see if that's all it is ?

  4. #4
    Senior User Club Member
    Join Date
    Apr 2003
    Location
    South Wales
    Posts
    6,566
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Are you not getting an em with ignition on? Then it's either the relay or you've lost the ignition feed to the ecu.

  5. #5
    User
    Join Date
    Jun 2009
    Location
    scotland
    Posts
    220
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Relay is defo clicking , yeah no eml with ignition on I think the ecu has had enough tbh looking for another one to try

  6. #6
    Senior User Club Member
    Join Date
    Apr 2003
    Location
    South Wales
    Posts
    6,566
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    What about the ignition feed? Black wire in the loom on the dizzy side...

  7. #7
    User
    Join Date
    Jun 2009
    Location
    scotland
    Posts
    220
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    That's never been touched since it was all wired so no much chance of it being that, I think the ecu was a lot hotter than normal the other day I changed the pump think something shorted out caused it to over heat ether that or it was on its way out. Thanks for the help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •