Fuel tank deadening

[abznovasport]

Anyone had any experiance of re shaping some foam/rubber on a fuel tank and straps before re-fitting?? Wouldn't mind some pics of where to put it as my tank had it removed before I got it.
Any suggestions on whats good to use will also be appreciated.

Cheers
Ian

[sr-rompa]

I used some old seat belts cut up to lenth and used spray adhesive to hold in place worked sound for mine. But sorry no pictures

[abznovasport]

mmm thats an idea but is the original stuff not a bit thicker?

[novacabrio]

I cut up a bike inner tube and put it along the straps, what I had left I also used on other bits and bobs like the base of the coil and strut brace

[Novasport]

I have some of this foam rubber strip for mine...

http://www.vehicle-wiring-products.e...eners2.php#frs

[dgbnova#1]

I used 50 mm strips (original width of hard padding cr/p ) of self adhesive foam for caravan doors and windows worked a treat

[GDN16v]

I have some of this foam rubber strip for mine...

http://www.vehicle-wiring-products.e...eners2.php#frs

Thats what i used the 3mm thick. Best stuff by far, but thats dam expenive. I got a whole roll for that price of a metre .

[8valve-craig]

I use 50mm adhesive neoprene.

http://www.ebay.co.uk/itm/1709696009...84.m1439.l2649

[abznovasport]

Thanks for all the replies guys, lots to choose from now
Does anyone know where abouts on the tank it goes or have you just placed it down and seen where the metal to metal is??

[Novasport]

It usually sits in two strips front to back, on top of the tank. It insulates the tank from the body.