Results 1 to 7 of 7

Thread: C16xe. Poor running./ wiring.

  1. #1
    Newbie
    Join Date
    Aug 2013
    Location
    Burton on Trent.
    Posts
    4
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default C16xe. Poor running./ wiring.

    Just fitted a c16xe to autograss nova.
    Fitted correct loom with large ecu.
    Not sure about the 9 wires that are near the ecu main connections.
    (The block connection is missing/cut off)
    Red, black x2, red/blue (thick and thin) brown/white, green.
    Brown/blue and brown yellow.
    What is vss? And I read about a wire to the gearbox.
    I've got the fuel pumping and a spark but still a bad starter/ runner.
    Maybe cam/crank sensor fault.
    Any info would be good.
    Thanks
    Last edited by Houdini77; 23-08-13 at 07:35 AM.

  2. #2
    User
    Join Date
    Oct 2005
    Location
    widnes or north wales
    Posts
    314
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Red is permanent live
    Black is switched live
    Thick red/blue is fuel pump
    Thin red blue is vss
    Brown/blue is ecu light
    Green is rev counter

    The vss is a plug that goes into the speedo pick up point on the gear box it basically lets the ecu know the cars moving. With out this it will stall every time you come to a stop. This won't stop it starting though.

  3. #3
    Newbie
    Join Date
    Aug 2013
    Location
    Burton on Trent.
    Posts
    4
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Many thanks

  4. #4
    Newbie
    Join Date
    Aug 2013
    Location
    Burton on Trent.
    Posts
    4
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Do I need any other wires connected.
    Eg, brown/yellow.. The blue wire from the temp sensor.. Does this need to be connected in any way.. Bare in mind its a stock car and at this moment I don't have a temp gauge fitted but I do plan to get one fitted eventually.
    Thanks.

  5. #5
    Senior User
    Join Date
    Jul 2012
    Location
    Birkenhead, Merseyside
    Posts
    3,317
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Here is a wiring diagram that I used to wire mine up



  6. #6
    Newbie
    Join Date
    Aug 2013
    Location
    Burton on Trent.
    Posts
    4
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Thanks.
    I don't have usual ecu/chip set up on this c16xe loom.
    This has the large ecu (standard)
    It's a autograss stock car so I don't have a dash etc.
    Out of the 9 usual wires..
    Do I only need the red,(live) black (switch live) and red/blue (fuel pump)
    Is it essential to have the...blue (temp) brown/yellow (ecu/light). Red/blue thin wire (vss) all connected just to get the engine running.
    Thx

  7. #7
    Senior User mowgli's Avatar
    Join Date
    Apr 2002
    Location
    somewhere in the 80's, hinckley
    Posts
    35,194
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    i think the vss wire is necessary, but the temp & ecu ones aren't. but i'd say its rather useful to rig up a small light & a triggering switch just so you can find out what's wrong if the engine starts running funny... efi is just too complex to fix without an EML flashing codes for you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •