£/Kg the most expensive tool I own!
Took me ages to find one in the UK with an aluminium cut though.
£/Kg the most expensive tool I own!
Took me ages to find one in the UK with an aluminium cut though.
Not in the post but it got delivered
2.0 turbo signumon a truck as it needs a clutch
The wrong fecking sump
Cracking engine, very under rated car. (I have one)Originally Posted by maddogdaz666
2.0 turbo signum
Be daft not to replace the Dual Mass Flywheel while you're at it too.
Got it for pennies too!
Only other thing to check is chain rattle.
What will it be used for. Head work?£/Kg the most expensive tool I own!
Took me ages to find one in the UK with an aluminium cut though.
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
New genuine front bumper and rear bumper mounting kits. A new early clear front quarter light glass.
Yeah, I have a profile for a C16XE head that I got a 37% increase in flow from, I don't have access to a flowbench at the moment so I'm gonna start with that and see how it sells, if there's people that want to give proper money for a well ported head I'll look into building and calibrating a flow bench so I can do other heads.
My new camping chair, I am now ready for Chilling at Billing
Posting Permissions
Reply With Quote
