alright guys need some advice before i go through with this.
Will this lot fit in my 1.0 2dr saloon?
1.2 8v full engine, exhaust, fuel tank and lines, box etc.. All from a 1.2 nova hatch.
alright guys need some advice before i go through with this.
Will this lot fit in my 1.0 2dr saloon?
1.2 8v full engine, exhaust, fuel tank and lines, box etc.. All from a 1.2 nova hatch.
Its from a Nova, so yeah it should fit. The engine should be a straight swap.
My Rebuild
They're over there with their new toys. Someone brought them in. No idea who bought them though.....
Exhaust different as far as I know between hatch and saloon - but retain your existing exhaust and use 1.2 front pipe.
You can use your existing fuel tank and plumb the return back into the fuel line using a T piece if you cant find a tank/cant be bothered to change it.
Only thing you really need to be aware of when changing from a 1.0 is the green resistor wire to the coil that needs changing to a normal wire to prevent starting and running issues.
You also need the front drivers side engine mount from the 1.2
you need the 1.2 gearbox too, the 1.0 bellhousing is different.
the wiring is a bit trickier, read this. http://www.pngclub.com/forum/showthr...ngine-in-a-1.0
blimey you guys know your stuff, nice one! sounds a bit more involved than i was predicting, but hey fingers crossed.
the resistor wire had clear insulation on mine if I remember correctly.
haha wish i had the know-how mate! total newbie to engine swaps in general.
now been offered a c20xe from a breakers for £210 delivered! choices choices. i know if i went that route i'd have to spend hundreds more than originally intended. But a nice thought =D