Hiya if anyone could help it would be sooooo appreciated..
I have a 1.0 miami blue nova, it started fine when I had it but problem is its got a VERY shoddy wiring harness (how it came may I add) .. Every wire has been sliced and put back together with lil white connecters and yes even the live red has been cut, sectioned into 3 and done with a white connectors.
I planned on sortin these out with either the blue correct connectors or male to female spade terminal and run harness behind fire wall. However a wire came loose and im getting no spark in the cap, or any power at the coil for that fact. I tested wire and its carrying 12v so obviously its an ignition wire, but its not black its a golden clear(ish) colour :s .. I found it behind glovebox attatched to a black wire tho.
But also before I lost all power to coil I lost use of hazards nd indicators that cud be fuse or relay but I have 5 of them :s .. 2 extra ones plugged into others.
I should add I have 2 switches nd a push button (came like that) cuz lad I gt car from only had one key the pillock snapped it in door lock
But any help on the 12v wire very appreciated ..
Thanks in advance, ash