i like looking at a LET in its rightful home
i like looking at a LET in its rightful home
thats niiiiice
when it spools it sounds like a jet starting up the noise on let of is infectious.
it made 269.9 so 270 brake with slipping clutch and water leak, but it would not hold boost at the level i wanted (22 -24 psi) it would hit 22 momentarily then drop to 16 and it didnt matter what we did it would not hold any more!
This on the other hand while setting it up,bent the needle on my boost gauge earlier and it only goes to 26psi. Best bit is the afr was still not leaning out
Set it up at the minute to hold a respectable 20psi but as spud said it will be getting more custom written chips ect soon with mild anti lag ect maped in and fingers crossed around 360-370 horse hopefully.
The guys with the rollers claimed that if it was capable of holding its peek then it would have been well in excess of 300 as it was. when its maped i will be aiming for about 28psi so about 2bar hopefully
Posting Permissions
Reply With Quote