Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: sony headunit issue!!!

  1. #1
    Senior User
    Join Date
    Nov 2007
    Location
    ST.HELENS N/W
    Posts
    2,640
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default sony headunit issue!!!

    right i have a sony headunit,with which ive also wired in this


    it started to blow the "inline" fuse on the back of the headunit.......then some guy i know tuned it so it gave a nice sound.

    ive also recently installed 4 x kenwood 5 1/2" speakers all round
    and since ive done this,when i turn up the volume(around 3/4's of its limit) on the stereo, it goes completely OFF then comes back on again automaticaly???

    can anyone guide me around this problem so that i can turn it up that bit more???

  2. #2
    Newbie
    Join Date
    Oct 2009
    Location
    Oxford
    Posts
    19
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hi,
    The Sony deck is going into protection,normally caused by current draw issues,try running a dedicated power feed direct from the battery with a 10amp fuse less than 18inches from the battery,also just double check all your connections as a blown fuse is normally a short somewhere.

  3. #3
    Senior User
    Join Date
    Nov 2007
    Location
    ST.HELENS N/W
    Posts
    2,640
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by rallyingace
    Hi,
    The Sony deck is going into protection,normally caused by current draw issues,try running a dedicated power feed direct from the battery with a 10amp fuse less than 18inches from the battery,also just double check all your connections as a blown fuse is normally a short somewhere.
    i have done all of this mate and new fuses have been fitted(even though the other's were in perfect use )
    it all seems to have happened since i upgraded the 4"surround speaker's too 5 1/2???
    i also pulled the main plug out of the back of the headunit which reset everything,but there is nothing on the stereo which controls "protection"if you like?

  4. #4
    Newbie
    Join Date
    Oct 2009
    Location
    Oxford
    Posts
    19
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Protection is a general car audio term, Kenwoods use Protection in their literature,Alpines with a 60w Power Output needed a direct battery feed to turn on due to current draw,might be worth double checking that neither of the two speaker wires are going to ground,this may cause the sony to power down.....

  5. #5
    Senior User
    Join Date
    Nov 2007
    Location
    ST.HELENS N/W
    Posts
    2,640
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    well ive had a play about with it today,in other words totaly stipped it all out and rewired it back in but still the same,so have no idea?
    Last edited by twistysnovagte; 18-10-09 at 06:33 PM.

  6. #6
    Senior User
    Join Date
    Mar 2008
    Location
    SE London
    Posts
    4,406
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    what wattage are those 4 kenwoods ?

  7. #7
    User
    Join Date
    Apr 2006
    Location
    Lowestoft
    Posts
    881
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    How have you wired the speakers up as a sony unit usually goes into protection like that if the ohms are wrong

  8. #8
    User
    Join Date
    Oct 2009
    Location
    In a Field behind the co-op
    Posts
    497
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    had this problem with a sony unit, turned out to be my amplifier, disconnect the RCA's from the amp then try it, maybe the amp is shorting out

  9. #9
    User
    Join Date
    Jun 2008
    Location
    shropshire
    Posts
    286
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    What cable are you using for your + and - to your amp? Too small for currant draw and you will get this. What is the "gain" set on, on the amp as dont forget this is not a secondary volume knob. As even though it might sound "louder" full whack. Believe me it wont be helping

  10. #10
    User
    Join Date
    Mar 2004
    Location
    milton keynes
    Posts
    488
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    sounds like the amp to me overheating cutting out when turned up. Have you wired head unit so can be played with ignition turned off? have twin feeds going to head unit then if still doing it. more than likely the amp. looks like a cheap one from the pic's maplin specail/mystar etc....

    I run 4 gage amp power and earth wires, sony head unit, x4 6in speakers, x4 tweeters and four amps and have no issues.
    Old amp used to cut out when turn up the tunes loud but this was cause under power and just cut out then came back in few mins later. alos blew a few fuses from time to time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •