I used an old battery charger when I did mine, a little bit of fun watching the amp gauge bouncing around!
I used an old battery charger when I did mine, a little bit of fun watching the amp gauge bouncing around!
thats what im going to use, a 12v car battery using a mains trickle charger.
I'd just use a 240v AC - 12v DC transformer like the type you use for bench testing. Tenner in Maplins. Then again, I wouldn't bother at all.
What are you doing for speaker enclosures, hanging Nova doors on the wall?![]()
lmfao nova doors on the wall. could do, but im going to wire up my surround sound speakers to the head unit. they are 5 small speakers. should be ok. and do you think its possible to wire up 2 large stereo speakers to the head unit too?
why dont you stop being a pikey and get a normal stereo!!!! so much easier
haha pikeybut i have a good system already, i just want to use a Subwoofer thats all. something to do aswell, i like doing all this stuff
![]()
you might getting a buzzing coming through the sub from interferance from house wiring. my home stereo has a groove button and its loud enough bass for the home.
You can use an old PSU to power everything mate! Got a 600 watt amp wired to it, powering a 1000watt sub. Need to connect a wire into a plug on the psu to convert it to 12v. Then u get a live and a earth cable to power anything.![]()
if it was a good system it would have a subwoofer outputOriginally Posted by NovaBoi92