Benn's on going build

[dan16v]

Dan: May work? Hope it will. Get on msn. No F20 for the mo.

Only reason i say that mate, is looking at the above picture, on myne the rad sits almost in the same place as a std set up, just centralised (iirc with kkk rad also has to come forward a smidge?). Looking at the std rad mount holes on the cross member, and the I/C position as it is, I cant see the thickness of the rad and a fan cowling fitting in with out pushing the I/C forward. And did you say the bumper already needs shaving in the position above?

[craig green]

Great progress Benn. Last time I looked you had posted pics of the journey home with the LET in the boot of a Vectra.
I hope its plain sailing for ya.

[Benn]

Dan: May work? Hope it will. Get on msn. No F20 for the mo.

Only reason i say that mate, is looking at the above picture, on myne the rad sits almost in the same place as a std set up, just centralised (iirc with kkk rad also has to come forward a smidge?). Looking at the std rad mount holes on the cross member, and the I/C position as it is, I cant see the thickness of the rad and a fan cowling fitting in with out pushing the I/C forward. And did you say the bumper already needs shaving in the position above?

I was told bring it as far forward as i could, so i did as well as putting it in to the middle. With the fan on the front, with the fan right next to the ic, the rads about 1, 1 and a half farther forward from the std place, which i hopoe will be ok. Yes i'll need to shave the the closest in lip of the bumper a bit.

[Benn]

Great progress Benn. Last time I looked you had posted pics of the journey home with the LET in the boot of a Vectra.
I hope its plain sailing for ya.

Cheers dude Its not been to bad as of yet, just bits i hadnt thought about or didnt know.

[dan16v]

Benn, if i were you mate, get the engine and turbo in place, then mount the rad as far back/ close to the turbo as poss!

[Benn]

Thats what i'm gonna do.

[krobinson]

Keeep errr lit sir!!

[~~joycey~~]

Fair play for takeing the plunge and cutting the x-member! Good stuff mate

[Benn]

Keeep errr lit sir!!

What?

[Benn]

Fair play for takeing the plunge and cutting the x-member! Good stuff mate

Cheers dude.