All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
What was wrong with the old bends on the turbo, or shall I say angles? do you want better flow?
Drivers side was just a silicone elbow, But was very very tight in there. So while it was off and all.
Pass side i had the end modded because of fitting the F28 mount, he made me this up..
But was told that the flow would be impeded by the shape. So a nice bend would be better...
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
It's not ideal by some margin. Who's that guy with the 600BHP red turbo corsa on MIG? He runs the sort of inlet you'd want. Pretty sure Chip has used a couple in some of his projects too.
Oh right i see, not seen that one before. Guy on mig using a dewymotorsport inlet.
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
Nic Barnes runs the gtir inlet on his corsa
When you think about how the standard LET / XE inlet flows from the top, it bounces down and across. Upping the flow will only result in a bigger pulse backwards, which is a world away from something properly designed.
Oh right, i know the std manifold isn't the best flowing but never really thought much about it.
All I wanted was a Pepsi, just one PepsiFar from suicidalStill I get them tendenciesBringing back them memories
That I really miss when I reminisce
Gary Hurn also ran a gtir inlet later on iirc...... Maybe on his build thread If you wanted more info on it etc.
Nick.