Does somone know what the right MAF/AFS sensor values should be for the 2.0liter engine (c20xe engine m2.8 ecu)? I used OPCOM and it shows at idle that I have 0.96 volt/21 kg/h.
I saw another guy on youtube as have the same car/ecu that had these values from his scantool, 1,12 volt/30kg/h at idle.

It says in the Hayness manual that the AFS signals should be this:
ignition on 1.40
idle 1.90 to 2.25
snap accelerate 3.00+