Liking the wide band in the vent
Type: Posts; User: C16xe; Keyword(s):
Liking the wide band in the vent
Not sure if they do one for the 8v but 99% sure a c20let one will fit. They come in different thicknesses depending on what spec your going for. If you do go for a cometic they require a certain...
Cometic
Got passenger sliders if any good
Messaged you
Thanks Iain I'll dig out my Haynes and have a look
I've got a multi meter
I have tried 2 sets of gte/sr clocks and neither of them show any oil pressure. Is there any way to test the dash? I have fitted a new (aftermarket) oil pressure sensor, is there any way to test this...
Fairplay to you that's very impressive for a 1st timer!
Thanks slimtater just had a quick scan through will have a good read later on when I sit down
I'll only be using the car in summer with a few track days if I can. Just want to do it once and hopefully won't have to worry about it for the next few years. Think I'll go with the white top coat...
And I was planning on going white but might reconsider lol
The por 15 looks like its held up pretty well then. Did you use the marine clean and the other spray before you applied it Iain? And did you totally bare metal the underside as I've read it can peel...
The Internet is a mine field for info on this! A friend gave me a por 15 kit with paint,metal clean and something else. But after reading up on it, it will only adhere to rust and bare metal. And...
I'm about to start stripping the underside of my nova to start protecting it for future use. There are a few rust areas where I will cut out and replace with fresh steel. As for the rest there are a...
On front normally on a petrol, down on the front where it bolts to the box
Anyone know how easy it is to remove the material and padding from a corsa b front seat back rest? I need to make a repair to the frame
It will definitely line up as most c20xe owners use the bonded 8v sump gasket. Not sure if the pick up will cause you any grief
Still wanted
Better pics of the gte choke...
Yeah, sorry I thought it was you who had messaged me previously. I'm after the full blank as I haven't got a switch to use them with
Sent from my SM-G973F using Tapatalk
Also after a choke blank as picturedhttps://uploads.tapatalk-cdn.com/20200802/f2d453d1d9c4d9ca66a64456f8cc2635.jpg
Sent from my SM-G973F using Tapatalk
Here's a picture of what I'm after thanks https://uploads.tapatalk-cdn.com/20200712/838397f3ea34953f7a03e421b1033885.jpg
Sent from my SM-G973F using Tapatalk
Thanks guys, the hole at the rear I'm pretty confident at doing its just the one behind the shock that worries me and since the panel is separate hopefully I can find a decent one.
Sent from my...
Is the rear arb you have fitted come from ebay?
https://www.ebay.co.uk/itm/182032468899
And have you attached it with clamps?
I don't mind making the one at the rear. Its just the one on the right of the pic behind the shock if I can find one from a donor car. Hopefully its the same on a 4 door saloon