Search:

Cant wait to have a look around this at vboa . Il be there on the sunday .

Sent from my SM-A105FN using Tapatalk

Trailer is near enough finished nowhttps://uploads.tapatalk-cdn.com/20220626/680fca3ad3ea019da40423425d4c24ad.jpg

Sent from my SM-A105FN using Tapatalk

Thats the piper one he managed to snap . Even the cast grain looks pritty shit to be fairhttps://uploads.tapatalk-cdn.com/20220613/8b4f718bb8af5be750a8a1261d043c80.jpg

Sent from my SM-A105FN using...

All the head and block machine work is done . 87mm bore and 34.1mm oversize valves all lapped in . Even managed to get hold of 16 titanium retainers . I have also got the piper ones in the picture ....

Cool as hell . I need a 3d printer

Sent from my SM-A105FN using Tapatalk

That should keep the charge temps down and the turbo spooling...

Last package time to get it all to the machine shophttps://uploads.tapatalk-cdn.com/20220510/8caecdc44be7708a8b5596be158e4422.jpg

Sent from my SM-A105FN using Tapatalk

Parts are slowly starting to arrive for this now gtx3582r ceramic dual ball...

Yea pod mate only going spectating now sadly . Not a single set of 87mm new pistons in stock anywere in the uk so had to get them ordered direct from wossner germany 3 weeks before they even get into...

Yea my mate has owned it for quite a long time it was built back in 2008 but the car it was supposed to go on ended up in a fire . So was never realy used . Im going to send it with my block for a...

Go push a cactus up your japs eye

Sent from my SM-A105FN using Tapatalk

New big valve head.
34.1 mm inlet
30mm exhaust
3 angle seats
Bronze guides
Piper springs , retainers , piper lifters
Cnc ported .
And cam area opened up to take huge cams

Will be going to...

Was onto a winner at the dyno until the headgasket failed and lifted the head . So time to go back to the drawing board . I have learned i will not use a cometic again now afyer seeing the horror...

Set of 4 with rings and pins . Used but good working order . 350 ovno can post

Sent from my SM-A105FN using Tapatalk

Mine are mounted to the flat floor . The pumps should be gravity fed from the tank and not having to suck the fuel in . Having said that i did used to have my pump up in the engine bay but it wasnt...

New stainless steel filter and lambda controllerhttps://uploads.tapatalk-cdn.com/20220403/7ea0ebd72ef3757b5022ec7e1c7aaa1a.jpg

Sent from my SM-A105FN using Tapatalk

15mm.id ptfe no excuse now to not have enough...

Any updates mate

Sent from my SM-A105FN using Tapatalk

Yea all work done mate . 11th of april for the dyno

Sent from my SM-A105FN using Tapatalk

Been very busy trying to get everything in order before the dyno day . Trailers all painted now . The top slick is the size im going to the bottom one is whats come off . Bearing in mind the...

Can anyone add the link to the instructions for fitting the tube and the sizes . I have got a spare head im about to send away for machining but fancied doing this mod to future proof it only problem...

Watched it as you say its hard to watch .
Sr grille badge
1.6 with a carb
1.2 spin shell

Far from an Sri
But all the videos give the impression its an sri

Has had some nice novas on the...

All finished just wants paintinghttps://uploads.tapatalk-cdn.com/20220220/df0779dd156db5b36a64580b99e457a4.jpg

Sent from my SM-A105FN using Tapatalk

Beam all welded and the jig works perfect no distortion what so ever . Cars gone for a little trip out for head rebuild and...

I have 2 more smaller diameter bracing tubes to go to the stub axle plates aswell but they can't be fitted until I change all of the bolts to cap heads due to access to get them in and out once its...