Dan's L reg Td SX

thats because it dont like daganem dustbins lol

Quote:

---

Originally Posted by davidfox280585

what welder you using mate as looks a good weld and im after a new one as mines about had it

---

Its a Clarke 175 TE Turbo, had it since new and got it in 2003. Cracking bit of kit and has done a LOT of work to!

Quote:

---

Originally Posted by stupot89

thats because it dont like daganem dustbins lol

---

Fix or repair daily :)

Jesus you have got an addiction to welding now! lol

i have a 150te turbo clarke and its cack if im honest

Quote:

---

Originally Posted by Balley

Fix or repair daily :)

---

3 days and no repair so im doing well

Quote:

---

Originally Posted by davidfox280585

i have a 150te turbo clarke and its cack if im honest

---

Maybe its Knackered, like I said ares is brill. I have used a few over the years and still think our one is pretty **** hot for the money.

Quote:

---

Originally Posted by scott.parker

Jesus you have got an addiction to welding now! lol

---

Scott by the time its done the car will have more welding wire and wax oil than your local factor!

Quote:

---

Originally Posted by scott.parker

Jesus you have got an addiction to welding now! lol

---

Scott by the time its done the car will have more welding wire and wax oil than your local factor!

Had two hours on her today. Very impressed on what I have achieved :D

First of all I finished my reinforcement of the turret top/chassis leg..

Welded a small piece of metal across the bottom and the right hand side.

https://fbcdn-sphotos-a.akamaihd.net...36255811_n.jpg

Then welded a piece across the whole thing similar design to how vauxhall made it but 100x stronger as yet again its two mm plate :)

https://fbcdn-sphotos-a.akamaihd.net...76979750_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...77136761_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...08983898_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...69328952_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...41826052_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...46948166_n.jpg

Removed the rad to Box in the bottom of the chassis leg and tie in the cross member better (should stand a couple of ponies pushing and pulling on it now!)

https://fbcdn-sphotos-a.akamaihd.net...25689883_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...39894226_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...75916222_n.jpg

https://fbcdn-sphotos-a.akamaihd.net...63877090_n.jpg

I then made a wing mount.

https://fbcdn-sphotos-a.akamaihd.net...30903830_n.jpg