PDA

View Full Version : 32/34 weber


burgo
03-01-08, 08:03 PM
ive read this thread http://www.pngclub.com/forum/showthread.php?t=91087 but to me it didnt clear up wether a 32/34 carb will be sufficient for a 1.6.
Adam
03-01-08, 08:47 PM
It'll "work"
But you'll loose power over the original efi.
And you'll need a carb pump/reg, dizzy/coil
burgo
03-01-08, 08:48 PM
there is no original efi as its not originally a 1.6 ;)
Adam
04-01-08, 02:02 AM
Hmm. ok
But its now a 1600 yeah?

In which case, same applies :p
burgo
04-01-08, 04:44 PM
no it will be a 1540 i hope lol and i know mpi would be best but i want to run a standard airbox ;)
craig green
04-01-08, 05:33 PM
pancake airbox?

Not sure it fits under the bonnet of a Nova as the Weber carb stands a bit taller than a Pierburg.

Sure it'll fuel fine as they do the job on Land Rovers & Fiesta XR2's. Just have it jetted accordingly.
General Baxter
04-01-08, 05:36 PM
pancake airbox?

Not sure it fits under the bonnet of a Nova as the Weber carb stands a bit taller than a Pierburg.

they must do as you can buy an adapter for them :thumb:
Paul
04-01-08, 07:28 PM
on 32/34 webbers's i have never seen the standard airbox.

Usually a panel filter sat on top of the carb....
burgo
04-01-08, 07:29 PM
on 32/34 webbers's i have never seen the standard airbox.

Usually a panel filter sat on top of the carb....yes but that is usually because people actually want to get rid of the airbox, i dont
General Baxter
04-01-08, 07:42 PM
Replacement Weber 32/34 twin choke carburettor kit. The carb kit is complete with all fittings, instructions and is a direct replacement for the standard Pierberg carb. Will use the standard air cleaner or choose a Weber filter below. Gives improved throttle response and performance

taken from tuning.co.uk
Mike
04-01-08, 07:45 PM
^ was gonna say, i know it fits, as ive done it before lol
mikey14sr
12-01-08, 02:38 PM
Standard airbox does fit as that's what I ran mine on for 3 years after fitting the webber, just needs the snorkel taking off to get enough airflow.
mikeoxford
15-01-08, 12:16 AM
I have a suitable adapter plate, new gasket and UFO stylee bin lid (it has to be modified slightly to accept the adapter plate).

I sold the 32/34 carb a while ago but still have the rest if you need drop us a PM?

and yes it does all fit under the bonnet :thumb: