Fitting T40s

[WULLIE_NOVA]

Hi guys ive just bought a set of twin 40s,What do i need to do to get them on my 1.6i nova? Do i need to swap fuel tanks as mines is the injection 1 the now? cheers p.s ive got the lincage and airbox for them just need to know what else to get them on and working;)

[Stuart]

you need a fuel pressure regulator to bring the pressure down to 3PSI

need a round port inlet manifold for the carbs - head fit
you'd probably need thefitting kit (misab plates and thakery washers etc)

1.4 carb dizzy, coil, ign module.

a RR setup (otherwise your a total spanner)

[WULLIE_NOVA]

cheers stuart. Ive got the manifold! Will i have to change tanks or will the regulator do the job?

[Adam]

Your tank will be fine.
Make sure you get a Fuel injection pressure regulator tho, there about ?40 and will reduce the pressure from 40psi to the levels carbs need(3-5psi)

Also remember to get the fitting kit, as the carbs do not get bolted solidly to the inlet, they need to have slight "give" to stop the fuel in the bowl from throthing etc.

You will also need an extending alternator lever, and the alternator lowering bracket if you dont already have those.