Straight through exaust, HELP!!!!

[old_skool]

If i Just put a pipe from my manifold to the back box with no bends in it will give more power,and it should give lots of sound wont it:?:
:D P.S. its not for road use :D

[Euan]

it will probably still have to bend round the rear beam will it not?

[Bilbo ballbaggins]

and the gearstick turret which is in the exhaust tunnel.

[_JH_]

what engine?

[MechaT]

The engine needs back pressure. you'll lose power. You'll definately get sounds, but not nice sounds.

The exhaust bends where it has to - round the rear beam.
Get a 4 branch manifold for propper results

[race-more]

it aint possible to have a straight zorst all the way 2 the back! it will foul the gearbox not 2 mention the rear suspension beam. if it aint for road try removing the center box, but better still spend the money and get a four branch and system to the back.

[Ste_Nova]

on a grasser 2.0 8v we used to have we fitted a carlton downpipe and exited the exhaust through the side of the front bumper!

[NovaNeil]

You won't lose power with a straight through exhaust! You'll gain it! You need back pressure for good Torque, not maximum power.

[mikeoxford]

on a grasser 2.0 8v we used to have we fitted a carlton downpipe and exited the exhaust through the side of the front bumper!

:o bet that was loud

[old_skool]

cheers guy's for dat