Pilbeam 6 point rollcage

[strcnova]

Right due to unforsen circumstances i am rebuilding the rally car with new shell and cage.

So i am offering up my cage for sale.
Its a 6 point cage from Pilbeam which is similar to those used in the works cars. Main points about the cage is the dia of the tubing is 50mm not 46mm so its stronger plus the rear of the cage is not mounted on the rear arch it mounted onto the rear strut top again making the shell stronger. Cage is in good condition with a few scratches but it is use for a rally car not a show car.

Cage is based in Scotland so collection would be easier but could courier at a cost.

Looking for £400ovno. These cages do not become avilable very often so grab it while you can.

http://file043b.bebo.com/10/large/2008/06/16/17/5825197834a8041162469l.jpg (http://www.bebo.com/PhotoAlbumBig.jsp?MemberId=5825197834&PhotoId=8041219431&PhotoAlbumId=8040997116)


http://file043b.bebo.com/10/large/2008/06/16/17/5825197834a8041163357l.jpg (http://www.bebo.com/PhotoAlbumBig.jsp?MemberId=5825197834&PhotoId=8041162469&PhotoAlbumId=8040997116)

http://file043b.bebo.com/10/large/2008/06/16/17/5825197834a8041162908l.jpg (http://www.bebo.com/PhotoAlbumBig.jsp?MemberId=5825197834&PhotoId=8041163357&PhotoAlbumId=8040997116)

[adam c]

have you got any pics of near the tops of the doors?where does it join from underneath of the dash to where?very intrested

[wilson_sri]

any chance you could get me some pictures of where it comes through the dash? also is it still in the car, and could i come through for a swatch at it?

[strcnova]

bar runs allong the top of the window but there is no bar under the dash but do not think it would take a lot to rig somthing up. Here is the best photo i have with nothing in the car

http://file039b.bebo.com/8/large/2008/02/17/00/5825197834a6918191057l.jpg (http://www.bebo.com/PhotoAlbumBig.jsp?MemberId=5825197834&PhotoId=6918191157&PhotoAlbumId=6918096862)

[strcnova]

yes it is still in the car. but not for much longer.

[wilson_sri]

kl mate. fire me a pm with your number, il try get through this weekend.

[strcnova]

bttt

[novarally]

Without doubt the best cage you can get for a Nova without going to a welded-in type. This is the first Pilbeam cage I've seen advertised for years, so it will be a good buy for someone, particularly anyone building a works replica.

[MAYES MOTORSPORT]

you have pm ring me about the cage:)

[MAYES MOTORSPORT]

bttt
yhpm:)

[strcnova]

bttt

[MAYES MOTORSPORT]

Can you post pictures of the triangulation that goes thru the dash to strut tops

[strcnova]

Toto100 the cage does not have the front triangulation hence only 6 point cage. sorry

[MAYES MOTORSPORT]

Toto100 the cage does not have the front triangulation hence only 6 point cage. sorry

Tonto;)

[strcnova]

tom you have have a pm and hopefully an email

[offplot]

Why are you breaking the car Mark ?
The car was mint when it left here .

[strcnova]

hi chris

I had an off on mull and was repaired by a friend but the repair work was not good and the shell is splitting around the bulkhead where it was not repaired. The drivers side front chassis leg got bent along with the crossmember, Leg pulled straight and the crossmember replaced with a new one but the cracks on the bulkhead and under the dash were not touched
Done two events and the stress has made cracks a lot worse hense bulkhead flexing when turning the steering along with driver's inner wing.
To repair it would mean back on a jig, take the inner wing off and re do it all a complete pain in the ass!! The thing is the car is complete and looking at it you would not know a thing. it was only when we put on rose jointed tie bars on and resetting the tracking that we we discover the problem 36hrs before the Pendragon rally!!!
Now bought another shell and going a full weld in cage for the start of next year and transfer all the other bits across.
So cage is now surplus to requirements. Got say Chris that cage was one of the reasons i bought the car.

How are things your end??

[strcnova]

now sold

[tom_beverley]

Cheers for your trouble is Mark, cage is brilliant, TOP guy too! :)