My Nova V6 Project

[Balley]

That arch looks a lot better than mine

[MattBrown]

I was always told the x30xe with G cams and MSD ecu was the fastest way to go with a v6?

Are the 3.2s quicker now?

[seno_v6]

I was always told the x30xe with G cams and MSD ecu was the fastest way to go with a v6?

Are the 3.2s quicker now?

Not sure mate, i was told to 3.2 with an f28 and run cav management, i dont honestly know alot about the set up you mentioned

[seno_v6]

Looks good mate! I'm honies brother by the way. Best get my loon done if you lot are cracking on haha

I've seen a few pics of your saloon, looking good mate cant wait to see them all together!!

[blue_peg_16v]

I was always told the x30xe with G cams and MSD ecu was the fastest way to go with a v6?

Are the 3.2s quicker now?

You were told wrong then mate about the ecu anyway as msd didn't do anything to the ecu the only difference to a standard Sri vectra with the Gsi were cams and a back box on the performance side anyway just as with the st200

[seno_v6]

After practising my mig skills on scrap metal, today i've decided to have ago on the nova, started to seam/stitch weld the engine bay, loads more to do but heres a couple of pics anyway

[Nobby]

welding looks good pal, David Dixon reckons 2.5 with 3.0 cams iirc over the 3.0, the 3.0 is for pub banter

[Mike]

welding looks good pal, David Dixon reckons 2.5 with 3.0 cams iirc over the 3.0, the 3.0 is for pub banter

All the Vectra boys rave about 3.0 cams in there 2.5 motors :/

[Nobby]

All the Vectra boys rave about 3.0 cams in there 2.5 motors :/

ye ive heard about a soo called mid range flatspot/ .... mine dont have it

[Mike]

ye ive heard about a soo called mid range flatspot/ .... mine dont have it

I reckon its BS personally as my sister had a 2.5 V6 Vectra and I couldnt notice any difference at all before/after she had 3.0 cams put in it!