progress pics on my reshell

[House]

Trailer is near enough finished now

Sent from my SM-A105FN using Tapatalk

Somehow missed this being finished, looks mega that mate

[total_vauxhall]

Cheers Iain I'm back

[Iain]

Lets see some updates then!

[total_vauxhall]

Eventually got round to getting some more bits done on the tube rear beam

A bit of info for anyone wanting to use these hubs from berrisford. The bearings they supply are to fit their own stub axles and are actually Vauxhall firenza front bearings. If you are using nova stub axles you will need to use the firenza bearing race they supply and standard nova bearings.

Sent from my Pixel 6 using Tapatalk

[total_vauxhall]

A bit or arch adjustment so I can actually steer

Sent from my Pixel 6 using Tapatalk

[novarally]

Great work on the trailer, and inspiring, thanks.

If the latest Brian James A2 I've just bought turns out to be wide enough to take my Nova (it's 1.8 metre so it's going to be tight), then I am seriously looking at building it into an enclosed type.

Would be lighter, lower, and a lot cheaper than buying a 'ready to go' enclosed one.

[total_vauxhall]

I work in a fab shop so have all the materials and use of machines at my leisure. But after I bought the trailer it only cost ?1000 to enclose and paint . that was 10 lengths of 25x25x1mm box and 10 sheets of 1.2 mm aluminium. And a shit load of rivets iv got about ?1800 in the entire thing rather that ?12,000 for the same size eco trailer . enclosing the trailer added 135kg to it . nothing at all . my main reason was I have sold my vivaro we used to sleep in at the track and bought a landrover . this now means I can tow the car to the track stick it under the gazebo and sleep in the trailer on proper beds ect . I have just put led strip lights inside for night time USB so powered off the laptop I use to check data logs on the car

[novarally]

I work in a fab shop so have all the materials and use of machines at my leisure. But after I bought the trailer it only cost ?1000 to enclose and paint . that was 10 lengths of 25x25x1mm box and 10 sheets of 1.2 mm aluminium. And a shit load of rivets iv got about ?1800 in the entire thing rather that ?12,000 for the same size eco trailer . enclosing the trailer added 135kg to it . nothing at all . my main reason was I have sold my vivaro we used to sleep in at the track and bought a landrover . this now means I can tow the car to the track stick it under the gazebo and sleep in the trailer on proper beds ect . I have just put led strip lights inside for night time USB so powered off the laptop I use to check data logs on the car

Thank-you for the extra info, much appreciated.

[Iain]

FYI 195/45/15 fit without any arch mods

[total_vauxhall]

Hahahaha yea I'll keep that in mind thanks that would have been a much easier way . will they work with tsw 5 spoke alloys ??? .