Biggest part of all the fab work finished today. Just need to tie it all in together now, OS nearly complete.
Had the rear back on the floor for a brief moment and it's safe to say I'm going to need coilovers.
To do list:
Tidy up loose welding ends
Mount rear diff
Drive shafts
Prop shaft
Brakes
Finish cage........
That will do for now.
Sent from my CLT-L09 using Tapatalk
Love it.
Progress
Sent from my CLT-L09 using Tapatalk
Lovin the regular updates!
Out of interest, what thickness material did you use on the turret top sides, the vertical bits?
4mm wall tube cut in half with a 2" stretch and 3mm tops made. I would have used 3mm wall tube if I could have got it. All the steel sheet is 3mm for mounts and 1.5mm for structure.Originally Posted by The Simps
Most of the strength will be in the roll cage hence the plates beside the turrets.
Sent from my CLT-L09 using Tapatalk
Sweet
I never did my turret tops thick & strong enough so I am redoing them again (3rd time lucky!).
3mm might be a little overkill but rather that than redo later onSweet
I never did my turret tops thick & strong enough so I am redoing them again (3rd time lucky!).
Sent from my CLT-L09 using Tapatalk
I’m having some one piece mild steel billet ones cnc’d with 10mm top & 5mm sides. Think that might be overkill!
Shit yes, that will do the jobI’m having some one piece mild steel billet ones cnc’d with 10mm top & 5mm sides. Think that might be overkill!
Sent from my CLT-L09 using Tapatalk
Started mocking up the rear diff mounts.
I have decided to just solid mount it because strangely enough I like the way it sounds also the response it gives when clutching.
Sent from my CLT-L09 using Tapatalk
Posting Permissions
Reply With Quote
