What bhp to expect ?

[Maddukeman]

[Maddukeman]

Iv put standard chips back in , ordered a fpr adaptor so will get that fitted and run 3bar, the one thats in could be an xe one, there's no stamp on it to say what bar it is, seen some that say 3bar, 2.5bar

[meritlover]

what did he say or show you when he did the runs? did he show AFR on the plot or was it just a limp curve?

[Maddukeman]

Not really shore bud, not that clued up on this, stuck his probe in the exhaust and was showing me a digital machine that he said shows that fuel was fine on low revs and tickover, but as soon as boost came on there was bearly any fuel and he looked quite shocked

[meritlover]

I bought and used Saab reds crushed the fpr a little for more fuel haha, do have a 2wd cossie fpr yet to fit thou

mines phase 2 never rolling roaded thou but you can tell the powers there, mine a beardy copy's,

They don't need mapping just plug and play I thought. ....

the ECU cant compensate for some random injectors and an uncalibrated crush of fuel pressure though.

[Maddukeman]

the ECU cant compensate for some random injectors and an uncalibrated crush of fuel pressure though.

Running cream and standard chips, is 3bar right and if I put to 3.5 be to much ?

[torquey]

Have you no standard yellows?

[Maddukeman]

Have you no standard yellows?

Sorry they are yellows

[Maddukeman]

Iv fitted a ajustable fpr just waiting on rail adaptor, will the return Union need blanking as the adaptor has an outlet on it ? ( tx )
also looking at getting new chips and different injectors if needed, are the vmax stage 3 one's OK on yellows ?