I was doing it directly at the control module in the passenger footwell, but youve given me a good idea there though Jack, all input greatly appreciated, thank you everyone
I was doing it directly at the control module in the passenger footwell, but youve given me a good idea there though Jack, all input greatly appreciated, thank you everyone
Sorry to hijack a Thread but does anyone have a wiring diagram for the standard CL/EW ecu relay jobbie? Need to know which wires are input/output for the control locking so I can tap into outputs for the alarm to work it..
damo.
Brown and brown with the white stripe are your input/output iirc, the other side are black/white and black/yellow i think, its definately not those two
Hi guys im in the middle of trying to connect my alarm to the standard cl module when the wires from the alarm are connected to the brown/red and brown/white on the module it locks then immediatly unlocks even when the alarm is armed any ideas?.
Damo.
Sent from my GT-N7100 using Tapatalk
All sorted now guys id left the original module connected and it was conflicting with the alarm......
Damo
Sent from my GT-N7100 using Tapatalk