Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Locating an X18XE1

  1. #1
    Newbie
    Join Date
    Dec 2001
    Location
    Littlehampton
    Posts
    28
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Locating an X18XE1

    Right, fair few of these about but I've yet to find one that comes complete, as in Engine, ECU, Loom, Transponder, Chip/Key etc etc. Have looked now at the possibility of just buying a donor vehicle, taking what I need and scrapping the rest.

    I know it came in the 99 and early 00 Astra's and also some Vectra's but not sure which ones. The problem is, most people selling them haven't a clue and seeing as there isn't much difference between this and the Z18XE engine I can see me easily buying the wrong one over the net. Can it only be found out via the VIN number and if I had that, where would I get the info from other than Vauxhall?

    Many thanks

    Nad

  2. #2
    Senior User Mark's Avatar
    Join Date
    Jul 2003
    Location
    Bristol
    Posts
    7,443
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    All Vectra B's are XE1

  3. #3
    Senior User Mark's Avatar
    Join Date
    Jul 2003
    Location
    Bristol
    Posts
    7,443
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    And you could just ask the seller if there is a throttle cable attached to the throttle body?

  4. #4
    Newbie
    Join Date
    Dec 2001
    Location
    Littlehampton
    Posts
    28
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by Mark View Post
    And you could just ask the seller if there is a throttle cable attached to the throttle body?

    If its a lady owner I doubt they would want to pull the cover off. Out of interest, does the engine cover just pull off?

    Secondly, did they all run distributors, or did they change after a certain time? I only ask as running the reg's through ECP, some gives the options for them, some dont.

    Thanks

  5. #5
    Senior User Mark's Avatar
    Join Date
    Jul 2003
    Location
    Bristol
    Posts
    7,443
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    2 Torx screws to remove the cover.

    None are distributor fed they all run top down coilpacks.

  6. #6
    Newbie
    Join Date
    Dec 2001
    Location
    Littlehampton
    Posts
    28
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by Mark View Post
    All Vectra B's are XE1
    Two of the 98 ones I've seen are running XE's not XE1's?

  7. #7
    Club Member Club Member Pistol Pete's Avatar
    Join Date
    Oct 2002
    Location
    Swindoncestershire Building: A Breeze Blue XE
    Posts
    12,849
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    how much you willing to pay??!! My Vectra that i use every day without fail has one of these fitted!! Its the SXi version...
    My Rebuild

    They're over there with their new toys. Someone brought them in. No idea who bought them though.....

  8. #8
    User raf24's Avatar
    Join Date
    Jul 2010
    Location
    ayrshire
    Posts
    1,478
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by nad View Post
    Two of the 98 ones I've seen are running XE's not XE1's?
    Correct,the earlier vectras were z18xe,only the the later ones were x18xe1 so they are not all the same.

  9. #9
    Club Member Club Member peester's Avatar
    Join Date
    Aug 2003
    Location
    staffordshire
    Posts
    5,963
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Its facelift Vectra B 1.8's (1999 onwards) that have the X18xe1, small block engine:


    Models earlier than that are big block (x18xe), so any '97 and '98 pre facelift 1.8 wont do.

    1.8 Sri models (1999 onwards again) run the z18xe small block. Same engine essentially as the x18xe1 with a few subtle differences.

    These engine codes are stamped on the block, by the gearbox. So any scrapyard will be able to tell them apart. I'm sure they'll have had this sort of enquiry before.
    "let me drive.. i won't make a fool out of you"

  10. #10
    Senior User
    Join Date
    Jul 2012
    Location
    Birkenhead, Merseyside
    Posts
    3,317
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Dgbnova"1 has just took one out of a astra and is complete with everything you need, just use your nova shafts n mounts and your away

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •