Piper BP285 Cams (14XE, 16XE etc)

[andy_mk3]

I bought these almost 2 years ago with intentions of running a well specc'd X16XE, but plans have changed and it's time to sell them on.

They fit the 1.4 and 1.6 16v engines, and they were removed from an X18XE1 before I bought them.

They are used but in excellent condition. Full specifications can be found here:
http://www.pipercams.co.uk/pipercams...pid=C16VBP285H

They come with the original boxes, although they are a bit tatty. Please note they do not come with the cam pulleys either, I just don't have a torx bit to hand currently.

Now for the pics:









These cams are made from blanks and are over £500 brand new.

I'll be asking for £220 posted for them, which is less than what I paid for them but they're not been used since I bought them, so I think it's a fair price.

I am open to sensible offers, and any questions are very welcome. Thanks for looking.

[chrisd1986]

Would i be ok with standard lifters and pistons

[andy_mk3]

I wouldn't like to say for sure. I was told that standard springs would be on the limit and it's strongly advisable to upgrade them. Standard lifters will be fine though. Pistons again I'm unsure of, I'm not sure what the maximum lift is that they can take.

[chrisd1986]

Ok al have to leave them for now then, ive not got the time to take the head off as ive got to get it ready for retro rides

[andy_mk3]

Not a problem. I don't expect these to sell very fast so do check back if you're still interested later on

[andy_mk3]

Provisionally sold

[andy_mk3]

Now SOLD :D