no spark on the c20let

[napalm_27]

yer tried everything you said earlier buddy
rewired the ign. live after pulling it back through the loom
the fuel relay isnt doing anything
theres no eml light
and theres no spark
wouldnt have thought it would have done that from just going from one running car to another car

[Sloth]

mine has. id try another one...

[napalm_27]

but why would there be no eml light on..?
its wired up and i even changed a working bulb into the eml and choke light hole and still nothing

[Andy]

Which wire have you used for the eml? (off the LET loom)

[napalm_27]

ermm the brown/blue wire i think it is or the brown/yellow one cant remember off the top of my head

[Andy]

Well it should be the brown/blue.Make sure.

[burgo]

i
but got everything wired properly to each wire using bullet connectors

AKA not properly. the only true proper way is soldered and heat shink. so i would surgest checking all your wiring before going any further

[napalm_27]

think its the brown blue to the brown yellow on the clocks as its a 1.4sr
think thats how it is iirc

[napalm_27]

AKA not properly. the only true proper way is soldered and heat shink. so i would surgest checking all your wiring before going any further

i only wired up the ones in the actually car i.e nova to engine loom and they are all fine
and im not soldering them jst yet as it will make it difficult if i need to move/change place of any wires that why iv used bullet connectors atm
i will be soldering them all up properly once i now for certain i dont need to mess about with them no more

[burgo]

your really not that confident with your own skills are you . temporarily connecting everything just incase