Results 1 to 3 of 3

Thread: sr 1.4 coil

  1. #1
    Junior User
    Join Date
    Aug 2009
    Posts
    59
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default sr 1.4 coil

    Hi-Is the cylindrical type coil used on 1.4 carb sr's a special coil to suit the module or distributor??I've had terrible trouble trying to get my engine to run-fire but not start,if it did start the plugs would soot up.I thought it was fuel related but swapped the whole ign system for an inj setup I had(ecu,3 pin dist and block coil) and it fired and ran no problem.I want to use the sr setup though so I want to try another coil first-I have old,good coils that I previously used on points ign on other cars-is the coil a direct swap? I don't want to damage either the module or distributor.My guess is that theres a poor spark-cap is new,rotor ok,ht leads ok.Any one any suggestions?? Thanks

  2. #2
    NORA IS DEAD JordyzNova's Avatar
    Join Date
    Mar 2009
    Location
    near BRUM !
    Posts
    1,371
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    use a 2.0 8v cavalier coil ??

  3. #3
    Junior User
    Join Date
    Aug 2009
    Posts
    59
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Thanks for that-Are the amp/modules prone to failure?Do they corrode between the amp and the bracket??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •