Today I managed to get a fair bit done.
Finished off the N/S/F inner wing
https://fbcdn-sphotos-a.akamaihd.net...45104675_n.jpg
I then degreased the bay and Etch primed the bare bits.
After that had dried I got the ode spray gun out and gave the bay a good coat of high build.
Seems the old paint on the front panel doesn't like the 2k high build, looks like I may have to bare metal the effected areas.
Here is the reaction.
While I was letting that harden I gave the rear quarter another coat of filler.
Blocked the top half off and put a guide coat on
And the front wing.
That's as far as I got though as I think now may have over done it
Dan
I like to punish myself, I was sat down relaxing in the house but I just couldn't take my mind of the ode Nova. In the end I went out and bare metaled the slam panel. Once I was happy it wasn't going to react again I gave it another coat of etch primer. Results came out well.
There are still a few areas to do around the turrets but I have made a good start anyway.
Dan
thats looking really good
Thank you Edd
Got up this morning and finished the filler work on the rear quarter.
Door Shut
Floor swept, panel degreased and blown off all ready for paint.
And Painted
The line on the far right is masking tape. Finish is very good!
In-between coats I also gave the bay a little more high build in areas
Really happy with the results.
Next job is to finish the front end of the filler work around the sill.
Dan
Looks Wicked, Come on a long way since i saw it at PVS last year
Just a bit pal, sadly It wont be there this year
Shame really, i think me and connor are going to head up again if the weather is decent unlike last year
Weather really did ruin last Sunday, I will be going in my Arosa still :P