*Sport owners, I present the Holy Grail! Pre-cut decals*

As some of you may be aware I am in posession of an original Irmscher 3M decal set for a Sport.
I heard a sign company was making replica decals that were good quality but fade and stripes were seperate and not pre cut.
I approached the owner who said he was willing to replicate the pre-cut decals if he could use my decals as templates so I sent them off to him.

I have recieved my original set back today undamaged and was also supplied with a brand new set of his decals, all I can say is...
WOW!!!:eek:
His standards have to be high as he supplies a lot of RS decals to the Ford boys and I am very picky about attention to detail as you may have seen from my project http://www.pngclub.com/forum/showthread.php?t=68132. I am very impressed with the quality & the handle apertures have also been tweeked to fit with later doors as most people do not have originals now(He can also supply them for original doors)

Anyway, here are some pictures for you to dribble over...

http://img.photobucket.com/albums/v3...t/DSCF1025.jpg

http://img.photobucket.com/albums/v3...t/DSCF1024.jpg

http://img.photobucket.com/albums/v3...t/DSCF1023.jpg

http://img.photobucket.com/albums/v3...t/DSCF1022.jpg

As you can see, the cutting is to a good standard and radiused on the corners like the originals. Only thing I cannot check yet is the fit as its going to be a while before I fit them. I am sure they will be spot on and as good as 3M's/Irmschers as they have been copied from the orignals.

They price is very reasonable, well a bargain at less than ?150 I think. It also can come with an abrasion guard to protect the finish.

Anyone interested please email me at richardsillett@ntlworld.com so I can get a list of names & numbers to him.

Oh, the fiddly little Sport decals for the quarters are also profile cut and put on backings to line them up correctly to stripes like originals.
The Bonnet decal logo is also part of the sticker.

veru nice, i can see a good selling point here! :thumb:

they look fantastic

have u laid your olds against new to check for sizing, with regards to fit?

umm think i can get 3m to make some more, seeing as there on the end of my drive lol

sweet.Shame ive just sold my white nova.

Quote:

---

Originally Posted by Stoo

they look fantastic

have u laid your olds against new to check for sizing, with regards to fit?

---

They are spot on, as I said he had my originals

Quote:

---

Originally Posted by General Baxter

umm think i can get 3m to make some more, seeing as there on the end of my drive lol

---

3M aint interested anymore, I have been told they do not have the artwork either.
They used old technology originally which they probably dont use anymore, these are produced in a more modern way

Rich, going back to what we were talking about when you were at mine, will these fit the later size door handle, or are these as per the original decals, for early doors. Either way put me down for a set.

Thanks iainel, was primarily just looking at the pictures Lol.

They look mint, really makes me want a Sport now knowing things like this can be made still

Quote:

---

Originally Posted by Nova.Sport

They are spot on, as I said he had my originals

---

fit should 'theoretically' be fine then bud

Quote:

---

Originally Posted by John H

Rich, going back to what we were taliking about when you were at mine, will these fit the later size door handle, or are these as per the original decals, for early doors. Either way put me down for a set.

---

Quote:

---

Originally Posted by Nova.Sport

I am very impressed with the quality & the handle apertures have also been tweeked to fit with later doors as most people do not have originals now(He can also supply them for original doors)

---

:)

Quote:

---

Originally Posted by John H

Rich, going back to what we were talking about when you were at mine, will these fit the later size door handle, or are these as per the original decals, for early doors. Either way put me down for a set

---

I made a VERY accurate template of a new door for him and he sent me a sample to check fitment on my doors which were spot on.

You could label em 3M and nobody would be any the wiser, the quality is that good

hmm should i paint my nova white lol

Quote:

---

Originally Posted by Nova.Sport

I made a VERY accurate template of a new door for him and he sent me a sample to check fitment on my doors which were spot on.

You could label em 3M and nobody would be any the wiser, the quality is that good

---

Good skills rich, As you saw i have set of new doors, and a set graphics for early doors! I'll e-mail you.

You are welcome to pop round and have a look anytime John
Bring a door, we'll have a partylol

Quote:

---

Originally Posted by Nova.Sport

You are welcome to pop round and have a look anytime John
Bring a door, we'll have a partylol

---

Thanks rich, i WILL take you up on that when i have 5.:thumb:

So.. are sets of these for sale now ?

Or are they a one-off

Hmm, could possibly be interested :D

Andy

They are for sale and as many as you need, email me ONLY if you are interested. I will get some names together for the supplier, might even be able to get a group buy

Look ****ing spot on mate, well done on getting this done, i have an original rear quarter drivers side in my door courtesy of Guy wilson. i will let you know in a week or so if i can afford a set as dnt get payed till next fri ! so i will pm or txt you mate thanks


iain

Quote:

---

Originally Posted by John H

Thanks rich, i WILL take you up on that when i have 5.:thumb:

---

Bring the XE if you can, wouldnt mind a blast out in it with you.

I'd be interested in a set.. but only definetly once i knew exactly how much they'd cost, and preferably a gaurentee of the fitment !

I'l drop you an email anyhow :)

i'll be having a couple of sets

Well done Rich, they look great :)

I have an uncut set of decals which I wasn't looking forward to cutting out, I'll have a set of these off you and keep the 'un-cuts' as spares.

I'll drop you a PM.

Dec

Please put me on the list

?150 isn't a bad price.

Quote:

---

Originally Posted by Matt2107

?150 isn't a bad price.

---

The original 3M's were over ?300 back in the day :eek:

?150 is a cracking price. I paid that much for a set of the ones that the original png were knocking out about 6/7 years ago and they didnt look a patch on these.

Well done Rich for sorting them

I need to get a few names together so he can print a batch off.
Might be able to get some kind of group buy but he is very cheap as it is.
He is off for a week so I will speak to him when he gets back
Cheers
Rich

Top Job Rich:thumb:

As per conversation today, put me down for a set!

I have the following people interested so far...

1. John H
2. Duick
3. Dec16v
4. Royston
5. Novacabrio
6. Toymex
7. Nov4 Sport - Poss
8. Mitch
9. Mint FRST

Anyone else interested please cut & paste the list and add your name to the bottom.

people interested so far...

1. John H
2. Duick
3. Dec16v
4. Royston
5. Novacabrio
6. Toymex
7. Nov4 Sport - Poss
8. Mitch
9. Mint FRST
10. stark (2No.)

1. John H
2. Duick
3. Dec16v
4. Royston
5. Novacabrio
6. Toymex
7. Nov4 Sport - Poss
8. Mitch
9. Mint FRST
10. stark (2No.)
11. Krobinson

1. John H
2. Duick
3. Dec16v
4. Royston
5. Novacabrio
6. Toymex
7. Nov4 Sport - Poss
8. Mitch
9. Mint FRST
10. stark (2No.)
11. Krobinson
12. novasportc550

Spoke with the guy thats making them today and he says he can do a group buy. Will keep you posted when I get more details.
Once I confirm prices I will need to take deposits and then I can get them on order.

1. John H
2. Duick
3. Dec16v
4. Royston
5. Novacabrio
6. Toymex
7. Nov4 Sport - Poss
8. Mitch
9. Mint FRST
10. stark (2No.)
11. Krobinson
12. novasportc550
13. nova13sport (x2)

Term: selling like hot-cakes mean anything to anyone :)

Good work in getting these made Rich

Quote:

---

Originally Posted by vaughanmc

Term: selling like hot-cakes mean anything to anyone :)

Good work in getting these made Rich

---

Ditto that, well done for sorting these out Rich, we were all waiting for some good quality, pre-cut, reasonably priced Sport decals :thumb: :thumb:

1. John H
2. Duick
3. Dec16v
4. Royston
5. Novacabrio
6. Toymex
7. Nov4 Sport - Poss
8. Mitch
9. Mint FRST
10. stark (2No.)
11. Krobinson
12. novasportc550
13. nova13sport (x2)
14. sport


Might as well take a set aswell.

Bleedin ell your all coming out of the woodwork now.
Will contact you all in a week or so to start making arrangements