I bought a tow strap for my Nova to replace the front tow hook. Is it difficult/irritating to take out the tow hook and replace it with the strap? Do all I need to do is take off the front bumper?
Printable View
I bought a tow strap for my Nova to replace the front tow hook. Is it difficult/irritating to take out the tow hook and replace it with the strap? Do all I need to do is take off the front bumper?
The tow eye is welded into the crossmember
Ah, so it needs a bit more work. Couldn't I grind that off and weld/bolt in the strap?Quote:
Originally Posted by turbojolt
As TJ says the hook is welded within the chassis leg on the crossmember area.
You might find some spot welds underneath to drill off to remove hole, otherwise it'll be a nightmare to fully remove. You could cut it flush with the chassis leg but it won't leave you a nice area for bolting through.
I fitted one by using a large bolt and washers (M10/M12 bolt, the washers were ones off front tiebar bushes, the huge curved ones) and clamped it in tight into the original tow hook. Never moved and towed OK on it, but be warned you can't then use a fixed car to tow your Nova to safety.
That's okay, I can't really drive into ditches over here, only into walls. I'd bolt it to the original tow hook, but the tow strap is about 11 inches long, and it would look strange. I'll see what can be done though. Maybe I'll cut off the front of the tow hook (the part that sticks out the bumper) and weld the tow strap onto that.Quote:
Originally Posted by Iain
There might be space to attack it from underneath, in which case you could bolt the tow strap behind the original hook and have both, if it's that long.
That's a good idea.Quote:
Originally Posted by Iain
I might just take it to someone to do it for me over the summer, seeing as I have no tools or welding machines.
Thanks for the input though.
Also reply to my PM please
balls, I also just thought of it. I'd have to remove the rad, wouldn't I?Quote:
Originally Posted by Iain
Nah radiator is in the middle of the 'hole' between the crossmember and slam panel, this pokes out the chassis leg which runs up the cambelt side of the engine bay
If you remove the bumper and poke it in you can probably drill and bolt it in with no special tools
Not replying to your PM lol:p
It's in such a weird place. Thanks for the input though.Quote:
Originally Posted by Iain
And do it god damn it.
I want to buy you a pint as thanks.
Free accommodation and Nova car hire for a week in Malta on holiday will do lol
Someone did this to a Nova I had, it was rubbish, firstly it looked very chavvy and when the car was towed it snapped.
Eventually the car was towed by attaching a tow rope to the antiroll bar, not an ideal way to tow a Nova but once I got home, I undid the 8 bolts, removed the arb, checked everything suspension wise looked fine and refitted the arb.
Personally I would never remove the tow eye, but each to their own lol
My car will never be towed. I'm doing it more so for appearance, rather than function. Kinda going for a blue/yellow/white/black build. Yellow towstrap would look pretty nice, but I doubt it'll snap, as it is rated for 5T.Quote:
Originally Posted by marc69
If I had a place to keep you, you'd be more than welcome. And as a car hire, I'd be your chauffeur in my 1.7L TD NovaQuote:
Originally Posted by Iain