gauging intrest in my throttle bodies and inlet manifold, complete setup
They are sbd taper bodies and run on mbe management the ecu is 912 iirc, the loom uses the standard dizzy and coil setup for ignition
£1100
Printable View
gauging intrest in my throttle bodies and inlet manifold, complete setup
They are sbd taper bodies and run on mbe management the ecu is 912 iirc, the loom uses the standard dizzy and coil setup for ignition
£1100
Possibly ineterested, what is included in the 'complete setup' ?
On SBD site.Quote:
Originally Posted by mov3d
http://www.sbdev.co.uk/Taper%20Kits/...troduction.htm
If the ecu is the 912, its not remmapable unless its done by SBD.
Can you double check the ecu, thanks :)
iirc it is ignition onlyQuote:
Originally Posted by mov3d
cant find any numbers on it as the sticker is abit torn etc but its not a 967 anyway, it has a socket to plug a laptop into though
they have just been freshly bead blasted and all linkages freshly zinc plated silver
im not selling them with the dizzy, coil or fpr, whoever buys them will need to use there own
How come your selling these? up grading?
btt
these still for sale??
yes
all linkages have been freshly zinc plated and all bolts replaced with stainless, i was going to use these but due to change of plan im not, some pics
http://i127.photobucket.com/albums/p...2/DSC05143.jpg
http://i127.photobucket.com/albums/p...2/DSC05145.jpg
http://i127.photobucket.com/albums/p...2/DSC05149.jpg
http://i127.photobucket.com/albums/p...2/DSC05151.jpg
http://i127.photobucket.com/albums/p...2/DSC05152.jpg
http://i127.photobucket.com/albums/p...2/DSC05153.jpg
http://i127.photobucket.com/albums/p...2/DSC05154.jpg
http://i127.photobucket.com/albums/p...2/DSC05156.jpg
sold