Printable View
I found these bits after trawling the net.
www.carsprays.co.uk
This gives a basic overview of respraying and damage repair
www.chpower.com/pentry.asp?prid=CH3000&lid=10
This one gives a basic intro into a guy that rebuilt a ford mustang. The pics are good for basic details on how to prep a car, respray it and polish up.
Thought it would make a good start to those that want info on prep work and saves me repeating myself!
Feel free to add any other links
Ade
also - for a ruddy good read try getting "how to paint your car" from www.motorbooks.com
Also Haynes do an excellent one on bodywork www.haynes.co.uk
enjoy
:D
sorry but you can not learn how to do body repair work by reading books if you wanna learn go outside in the garage bring the car in and get cracking as you will only be able to do it with your hands
intereting comment m8 - but before you start you might wanna know what your letting yourself in for and at least understand the basics before taking 80 grit wet n dry and a grinder to your car! the books and sites are designed to give people an insight into the order in which to do basic prep and body work.
tthey give you some valuable info on the techniques involved and the timescales for projects - saves the abandoned half finished stuff"
just bringing your car in and getting stuck in is one way to do it but if you dont plan and dont know what your doing you'll feck your car and it'll cost more in the long run to repair.
its your choice how you do it - I just recommend you follow a set process - they were also posted because people kept asking the same things - these sites answer some of the questions asked.
:wink:
80 grit wet n dry
surely P80 aint wet n dry
books are good if you no nothing at all about body repairs just so you can learn basic terminology and also so you know was products are available and how n when to use them. if you wanna learn how to paint etc buy a couple of panels from a scrappers n have a go. practice makes perfect and you will learn from ur mistakes. a bodyshop suppliers should give you good advice too. (a proffesional place not halfords or motorworld unless u want crap advice)if you do have ago, practice, get the hang of it and sort something for urself. you know if youve done it yourself n if its good u can be proud of it.
i agree with ade 100% that?s a really daft remark. For starters everybody takes in knowledge different ways some by reading and others practically. If you choose ?bring the car in and get cracking? with out any kind of knowledge about what you are about to do or someone showing you it will end in tears. You need to be told/shown and understand the basics otherwise poor results will be your only results. Plus a lot of people just cant do bodywork it is a skill which needs to be matured over time and practice( I am taking about 1st class jobs none of this quick blow over crap). You can only go so far with out the use of books, videos etc. Even if you don?t agree with other people methods its good to know them to help you develop in your skills.
If reading is not your thing remember there are lots of videos etc
www.dukevideo.com/Products/M523.htm
http://www.amazon.co.uk/exec/obidos/...295112-2003820
anything from jon komoski is worth reading and watching!
hi buddy,my advice would be to read as much as you can,talk to as many folk as you can and get as much practice as you can on scrap parts before attempting anything on your car
trust me you can never learn or read to much about this kind of thing,only time will produce good results
being a sprayer,my advice would be to read up on it a little bit,and using ****hole tins will get you knowwhere,this industry is growing and getting more advanced everyday you have to be competent with maths for mixing,paint/thinners/activators i you dont get it spot on it will go a little pete tong,i have always maintaned preparation is always the most important for a goof paint job,but also not being able to mix and apply paint will waste all the preparation work,get a bonnet sand it down prep it e.g rust scrtached dents etc prime it spray it,dont do fancy vents or badboy bonnets just try a standard bonnet with a hvlp(high viscosity low pressure) gun,or anti gravity! sum people make it out to be easy to do,ive given a mate a shot of spraying his own centre console he made a pure **** of it(he was being cocky telling me its easy!!
I think its vital to do some reading up first, painting and repairing its easy job to do even when you know how lol , the worst thing you could possibley do is start on your own pride and joy make a mess then have to pay someone to put it right.
What i found useful before i got in the game, was to read a little and practice on a old panel i had laying around. what also makes it hard to get a nice finish is the guns you use and the paints, with the paints being waterbased now makes its really hard on people without a ovenbake or heaters
im not in trade, im a decorator lol but i have learnt that if painting over (or even spraying over) some one elses ****e work, with out good prep it will only look as **** as it did
"you cant make sh*t shine" so they say ;)
i have been doing bodywork and spraying for bout 8 months and found that it is more practice than wot you really know in your head , the more you practice tha better you get as every1 is different , your technique could be totally different to sum1 elses but the overall finish could be exactly same the same astha other persons , its just the way you choose to doo things (there is no wrong way) http://i161.photobucket.com/albums/t.../babyblue3.jpg
me and a freind decided too have a go , he has bein doin bodywork around 20 months naw and i have being doin it around 8 months , he is 18 and i am 17 we modified his 1.2 clio as you see above in his back yard (not a garage or a bodyshop) we spent around a month doin it and it turned out like this http://i161.photobucket.com/albums/t...o/guyscar2.jpg
http://i161.photobucket.com/albums/t...to/guyscar.jpg
tha car didnt come out too bad too say 2 teenagers had dun it :D tell me what you fink
ya did a good job
ya never sprayed that in ya back yard??
im a painter,there is a right way and a wrong way,lots of each!
it wasnt sprayed in the backyard but all the prep work and filler work was done in tha back yard :D
if its worth doing then do the research! and do it well!! jmho:)
you can't polish terdlol lolQuote:
Originally Posted by Mike
Quote:
Originally Posted by scottn
lol
nice job cheers
Its obviously good to read up on something to get a rough idea about what you are doing - then as they say ''practice makes perfect.''