ok, if i had a 1.2 carb engine, and a 1.6 8v, could i fit the inlet and carb and dizzy? would thios work with drilled out jets?
Printable View
ok, if i had a 1.2 carb engine, and a 1.6 8v, could i fit the inlet and carb and dizzy? would thios work with drilled out jets?
IIRC the dizzy drive is different on the cam, i used an ast2 in my 1600 8v to run a 1200/1300 dizzy set up.
id atleast fit a twin choke lol
Why dont you try a 32/34 DMTL Webber.
the manifold would be a crap fit on the 1,6 head,
ok, so it would be easier to mpi it? the nova is carbed and will be used a s a daily, but i have a habit of over revving 1.2's and killing them...
1.6 block
1.3 head,
webber 34/32 carb
1.3 cam
1.3 dizzy set up
but carbs are gay
Leave the carb alone in the museum where it belongs.
:eek: :eek: How? lol.Quote:
Originally Posted by Rob
You must be leaving it late as hell to change.
Tbh though the 1.2's are what 0-40 for new engine, maybe worth replacing another 1.2 carbed engine after you blown it rather than faffing around converting it to mpi.
Orrrr change gear earlier :p ;)
put bike carbs on the 1600 - job done
or fit the V6 into the corsa C