Printable View
Mk2 Spoiler (GSi, SR) etc
1. Use the original pins, drill the boot and mount it correctly ?
2. If it doesn't have pins...Sikaflex it on ?
3. Again if it doesn't have pins...Bore a hole through the spoiler and bootlid, use self tappers to fix it on then filler over the holes you drilled to mount it ?
Which one is the correct way ?
Also what's the point of doing number 3 when you could save yourself a lot of hassle and time by spending £20 or so and use option 1 ?
Let the talking commense :)
buy one with the bolts in the first place. and use wurth bond n fix.
So your saying number 1 Kev ? I'd say number 1 as well mate
I should have put a poll on here but don't know how to
Certainly woudn't rely on stickaflex or other sealant alone. I'd not be too keen on self tappers either, I'd want bolts holding it on.
Number 1 Jack ? lol
Yeah, assuming you have a spoiler with the OEM bolts on it - if not, drill some bolts into it
Poll added lol
Option 3 should be bodge it to death - Can it be changed to that please ? :)
sticko****. is crap and best ovoided imo. i use wurth stuff in work and tbh you could stick poo to a shiney shovel with it.
Just used Sikaflex as an example lol Could be any bonding stuff...Not sure what we use at work...3M stuff I think!
I was just trying to get my point across that option 3 is bodgey, pointless, time consuming and crap looking when you could much easier to it the proper (OEM) way
That is all :)
Tigerseal FTW :d