Printable View
it sounds alot better than on the video when it comes on boost the video mic cannot pic up the sound just distorts but for £9 it'll doQuote:
Originally Posted by Adam
there is a 50mm bov on there but it wont operate diaphragm is damaged i think so it needs to go back for an exchange
cheers:thumb:Quote:
Originally Posted by let_nova
gary is it a tial bov you are using? iirc don had issues with his now opening, you can get different pressure springs dependant on the amount of vac the engine generates :)
yes i am in the process of getting a lesser rated spring:dQuote:
Originally Posted by Fow16v
The following information is what Tial recommends as the default spring pressure to choose in their bov's. 11psi is the default spring and should be used if you don't know what spring to get.
Measure Vacuum at idle (engine at operating temperature
Vacuum Reading between -22 in/hg and -23 in/hg use -12 psi spring
Vacuum Reading between -18 in/hg and -21 in/hg use -11 psi spring
Vacuum Reading between -14 in/hg and -17 in/hg use -9 psi spring
Vacuum Reading between -10 in/hg and -13 in/hg use -7 psi spring
i have opted for a 9psi spring ordered from usa today so should be with me some time next week
sounds like a pinto when it comes on boost!lol
At least Garys fuel pump works!
looks and sounds amazing good job
cheers mate :dQuote:
Originally Posted by donaldo89