some vw beetles had jeans material seats. its called a jeans edition iirc
Printable View
some vw beetles had jeans material seats. its called a jeans edition iirc
if you need some trim of some kind to do your seats drop us a pm mate i might be able to help you, good work btw !!!
updates?????????
Updates lol joking aint ya lol lol
Hes to busy messing about with his moutain bike HAHA!
No updates as yet, got more bits sorted for it, ive got FK coilovers for the front now and a pair of spare astra GTE wheels (cheers Joff) wanted to get the engine out last weekend but couldnt get up to the unit to do it, only need to get the engine out so can get the welding done then thats it for the shell barring a door and a wing!
Guin says mushka avanti uncky spud
Right update time, and ITS DEAD!!
Went out this morning after a steaming hot cup of enthusiasm and with the help of mr roth we pulled the front end off and ummm, well ill let the pictures do the talking...
Gave her some air in the back tyres as they had gone flat again..
http://i8.photobucket.com/albums/a36...5092010172.jpg
Then after a rinse off, the last few pictures in one piece..
http://i8.photobucket.com/albums/a36...5092010173.jpg
http://i8.photobucket.com/albums/a36...5092010174.jpg
Been using her as a storage yard..
http://i8.photobucket.com/albums/a36...5092010175.jpg
http://i8.photobucket.com/albums/a36...5092010176.jpg
Got her eyes and and grille off, looking a bit holey and manky behind there...
http://i8.photobucket.com/albums/a36...5092010177.jpg
http://i8.photobucket.com/albums/a36...5092010178.jpg
http://i8.photobucket.com/albums/a36...5092010179.jpg
Bumper off and didnt look too bad, till i started poking the crossmember with a pointy thing, there is something quite sickening about the mushy scratchy noice a screwdriver makes as it parts rotten metal isnt there..
http://i8.photobucket.com/albums/a36...5092010180.jpg
Mullered wing there methinks..
http://i8.photobucket.com/albums/a36...5092010181.jpg
Then the other side wing off and look at this massive hole, im fairly sure that should be attatched...
http://i8.photobucket.com/albums/a36...5092010182.jpg
After a little more pokeyness on the crossmember...
http://i8.photobucket.com/albums/a36...5092010183.jpg
Gone behind aswell..
http://i8.photobucket.com/albums/a36...5092010184.jpg
http://i8.photobucket.com/albums/a36...5092010185.jpg
More to show the inner arch, underside of the strut top is gone too..
http://i8.photobucket.com/albums/a36...5092010186.jpg
http://i8.photobucket.com/albums/a36...5092010187.jpg
http://i8.photobucket.com/albums/a36...5092010188.jpg
Hmm, pretty sure youre not supposed to be able to see daylight through there..
http://i8.photobucket.com/albums/a36...5092010189.jpg
Inner rear arch parting the seam sealer in the boot, so thats gone too then..
http://i8.photobucket.com/albums/a36...5092010190.jpg
Boot floor to back panel...
http://i8.photobucket.com/albums/a36...5092010191.jpg
This side doesnt look too bad but is going behind the previous repair...
http://i8.photobucket.com/albums/a36...5092010192.jpg
More holes anyone...?
http://i8.photobucket.com/albums/a36...5092010193.jpg
And in this pic look at the roof line and the scuttle panel line, they both look level, the slam panel however does not, that says to me that the nearside of the car is sagging down due to the rot yes?
http://i8.photobucket.com/albums/a36...5092010194.jpg
Oh and my arch which has parted inside and gone through into the car too, big enough to get your hand into...
http://i8.photobucket.com/albums/a36...5092010195.jpg
http://i8.photobucket.com/albums/a36...5092010196.jpg
In all fairness i expected this really as its been stood under a tree for about ten months or so without a cover, so its time for a reshell methinks, quite gutted but its too far gone i reckon, especially seen as i cant weld, nor have a welder lol
:cry:
oh dear, doubt the scrap man will even take that lol
Chin up matey :) You'll get a good shell down that end with relative ease surely ?