that is good mate omp are good with there prices my mate fitted everything omp to a saxo and it did look good :)
Printable View
that is good mate omp are good with there prices my mate fitted everything omp to a saxo and it did look good :)
was gonna get the omp subframes too but they weren't as customisable as the tubular ones
I will be ordering some omp stuff for my golf soon :)
defo worth it
Brand new Hella headlamp for less than £20 delivered.
http://img.photobucket.com/albums/v6...52190EAA5E.jpg
Dave.
Koni adjustable fronts with 300lb springs :)
Got a carbon dash which I believe is from a caterham type car, I'm thinking of fashioning it into a centre console of some sorts
http://i1279.photobucket.com/albums/...pswqeiifca.jpg
Edit .wrong thread fml
Steve1434 were they the ones off ebay? He accepted my offer then message me saying he's been offered more. Well peed me off.
Fans
PAS cooler
front pipe
and AFR gubbins
http://i.imgur.com/X4Ah7SF.jpg
Finally got a new genuine GM/Bosch fuel pump for the Irmscher injection. Completes the list of new parts I wanted for it(ie everything apart from the cast airbox & manifold).
http://img.photobucket.com/albums/v3...psgah4jatu.jpg
Picked up a new genuine Hella GM headlight for £13
http://img.photobucket.com/albums/v3...psrpohmd1p.jpg
And the rarest bit, a brown electric window switch panel :). Got two now, one for the Spider and another for the Swing.
http://img.photobucket.com/albums/v3...psdpxzgvvg.jpg
Been shopping with the Snap-On man too. Finally got my cover for the new roll cab and a couple of other bits.
http://img.photobucket.com/albums/v3...psh8kmjvvb.jpg
http://img.photobucket.com/albums/v3...psmqr4zcoy.jpg
http://img.photobucket.com/albums/v3...psscrb1ah3.jpg
http://img.photobucket.com/albums/v3...psmaaxfq0e.jpg
Flank drive sockets mmmmm :thumb:Quote:
Originally Posted by Novasport
New VXR interior for the wife's Meriva project...
http://i2.photobucket.com/albums/y15...psmypfibfz.jpg
Joff
Picked up these beauty's today...
http://img.photobucket.com/albums/v3...psljx8zusx.jpg
Also got this the other day, an original GM showroom pic...
http://img.photobucket.com/albums/v3...psxcfvl13m.jpg
Kinda won these one Ebay.. Didnt mean too.
http://img.photobucket.com/albums/v3...pshbbtra0b.jpg
Because they are...
http://img.photobucket.com/albums/v3...psjvc2zyuq.jpg
http://img.photobucket.com/albums/v3...psesqrfz39.jpg
What they like for fitment Benn? What size discs do they run?
std mg tf iirc..
http://img.photobucket.com/albums/v3...psljx8zusx.jpg
is that drivers side mount a solid metal bush or rubber? HH do make know how to make sexy metal fab work
As mo saids, MG tf and tfzx, they use a 285mm disc. I wanted to try them to see if i can run a larger disc with less off set. Due to the built in brackets rather than the 2bit brackets like my Wilwoods have. No clue yet if it will work tho.Quote:
Originally Posted by Novasport
Give that man a cookie.Quote:
Originally Posted by mowgli
Funny, I've looked at these in the past when I had the track car, they pop up a lot really cheap! Hope you get them to work dude.Quote:
Originally Posted by Benn
They first sold after i think he mate was bidding on them at one £100.
He re-listed them and i put a max bid in of £73.27. Which he accepted in under 2 mins and closed auc. So much cheaper than before.
Im gonna looking at using a 308mm GM disk and start a lil mock up soon.
Gaskets. Because the GT4 is still in pieces, two months after taking it apart lol
got some car speakers that turned up got them fitted after getting them in like the hour lol
Speeding fine from France. Admittedly, it turned up over a month ago but I only just got round to scanning it. €90 for doing 35 in a 32 zone. Damn les frogs.
http://i537.photobucket.com/albums/f...a.jpg~original
Niek,
Can you just ignore it and never go back to France (some may say this is could be a good thing!!) or do they send round the cross boarder heavies??
Joff
No 10% allowance in France?
Managed to find a left hand roof support to match my new right hand support for the Spider :).
http://img.photobucket.com/albums/v3...ps2wo7zxq8.jpg
Some Gulf competition oil for the Sport. Fitting a new sump so will change the oil & filter.
http://img.photobucket.com/albums/v3...psvhzsuewe.jpg
A new Hella recon 2 pin dizzy for the Spider
http://img.photobucket.com/albums/v3...ps2gacry8c.jpg
Got some 13S Rods & Pistons for my rallycar build. Pistons are junk from munching valves but rods are nice having been deseamed and with ARP bolts. :thumb:
http://i1279.photobucket.com/albums/...psxyljd19v.jpg
http://i1279.photobucket.com/albums/...psp7afdegg.jpg
LOL chances of getting stopped by French cops are next to nothing, they are too busy hiding behind bushes with a radar. lolQuote:
Originally Posted by joff-turbo-nova
Errr no. :pQuote:
Originally Posted by Rob H
had this bit of Nick J workmanship turn up yesterday.
http://img.photobucket.com/albums/v2...psg8kaongq.jpg
now just got to fit it, then find a Carbon scuttle panel cover.
Thanks to Colin (Novarally) for the fast postage.
Oooh that's very nice - gets a big thumbs up from me !! I'll have to track Nick down at Billing - I'll look for the guy with the long hair and designer shades as usual !!
Joff
Cheers Joff, just need to fit it now.
Suspect he'll be around the JOV stand somewhere.......
AP calipers are brembo calipers!
GJ Benn; you might end up having to weld those holes up because they look to be so close to the o.e nova positions. Probably need to grind the outermost face of the caliper too to clear on an ET49
Quote:
Originally Posted by BRoadGhost
Are they? And hhmmm They will be stepped back a bit to clear the wheels... I need to do a mock up at some point.
Received a package all the way from China. Ordered this on Aliexpress. Indicated delivery time was 5-6 weeks, package dropped in the mail within 2 weeks. I can live with that. :d
http://i537.photobucket.com/albums/f...4.jpg~original
Some more unreadable Chinese gibberish on the opposite side of the package
http://i537.photobucket.com/albums/f...1.jpg~original
Very well packed for what it is (bubblewrap ahoy!)
http://i537.photobucket.com/albums/f...2.jpg~original
Sturdy connectors of the Anderson variety, as used in electric forklifts. These are 20 mm² size (4 AWG), to be used for a removable amplifier and subwoofer. Excuse my pre-**** photographic skills.
http://i537.photobucket.com/albums/f...3.jpg~original
Another package arrived with more connectors. Neatly sealed too.
http://i537.photobucket.com/albums/f...5.jpg~original
Original Anderson connectors, apparently. Well as original as Chinese Andersons get I guess. :p
Not sure what to use these for yet but they'll come in handy at some point. :)
http://i537.photobucket.com/albums/f...jpg%7Eoriginal
Included were a pair of T-shaped pullers. Nice.
http://i537.photobucket.com/albums/f...7.jpg~original
My fauxpro sj4000 wifi arrived :)
4 batteries, a double charger, a semi hard case to keep all the tat in and a myriad of mounts etc for £74 (although I had £27 in my PayPal account so really man maths says it was under £50 lol )
cue the amateur porn
Shiny new set of RHD headlights with 'modern' (lol) H4s and H1s.
http://i.imgur.com/ZiqiaK0.jpg?1
And a nicely machined mech fuel pump blanking plate.
This lot turned up at the unit, all on the same pallet.
http://i995.photobucket.com/albums/a...pstjw8tuvl.jpg
Then got home to this.
http://i995.photobucket.com/albums/a...psmmxvqjyl.jpg
All parts for the new build.