mine is fitted to a mk1 feel free to come down and copy:thumb:Quote:
Originally Posted by DMcBXE
Printable View
mine is fitted to a mk1 feel free to come down and copy:thumb:Quote:
Originally Posted by DMcBXE
where does the wires on the trans ducer go too ??? cheers alex
Brown wire is an earth
Black wire is an ignition live
Blue/Red wire is the speed sender wire (On the back of the dash, white plug)
Hope that helps...
yo, got my digi dash wired up and everythings going fine the only problem is that there was no wires coming from the transducer its self ,to run to the back of the dash, will have to make these wires myself and join them with spades. theres three spades coming from the transducer. do anybody know which colour wire runs to which spade. cheers
following recent posts on here and mig about the tranducer wiring plug i thought i would draw a better drawing up about using the cavalier / calibra plug so here it is
http://i517.photobucket.com/albums/u...UCERWIRING.jpg
fitted mine today all mine are bright but the left hand side is not very bright ??? bad earth or bulb ??
is the fuel gauge slow reading coz i jut put 25 in the car and the fuel light is flashing
all fixed now
roughly how long does it take to complete this conversion?
Took me about 2 hours from start to finish, thats removing the old items and running new wires etc :thumb: