Printable View
This is a very good WIP :D
I'll add my 1p's worth altho lets be honest i know feck all (jb will "back" me up on that lol)
End of the day Olly, your in the same situation as i am. Have a "normal" car and a track car. When i map mine AGAIN it will be on v power as thats the best fuel on the forecourt.
Look forward to an update on friday, i shall be up "feeding" anyways :thumb:
small update...
was around silverstone area today, so I dropped by Mardi Gras Motorsport to buy some Ferodo DS2500s, they had them on the shelf for Dynalite II calipers, and a bargain price of ?42
wanted them in for trackday at Bedford, but obviously needed them bedding in, so i fitted them tonight intime for the journey daaan saaafff, so that'll be 300miles worth at least.
also removed manifold to fit new lambda boss, and bung, so got a holecutter/ drill bit out and cut a hole big enough for the boss to fit inside, slight tap with the hammer, and them seam welded around it to ensure no blowing, sprayed it up and refitted to car/ exhaust - all checked and is sweet
just two bits to do now, cigarette lighter plug socket to be wired in for TomTom, and refit doorbars to rollcage :)
Sweet :)
Nice one mate.
I'm not gay
That seals it then Olly, Map it on V power, it appears to give people erections if nothing else! lol
I always walk round with a stiffy, its just so small you would never notice Lee lol
I've decided, I'm going to map it on whatever the highest RON petrol the petrol station sells that I run out at.
I'm currently on half a tank, so it won't get me down to Track n Road.
Simple. :)
Now you have said that it will be a Bp with the new 102 fuel lol
reet then, all set for mapping tomorrow now then...
pics of new pads i've decided to try out
http://i136.photobucket.com/albums/q...ure/nc0613.jpg
very pleasing to see that the apparent rubbish EBC greenstuff have held out very well considering alot of road mileage, along with a wet trackday
http://i136.photobucket.com/albums/q...ure/nc0614.jpg
bought itg 130mm ID sausage filter and backing plate, and to re-route all the fuel lines which gave me a chance to flip FPR so gauge is easier to read too
http://i136.photobucket.com/albums/q...ure/nc0615.jpg
Out of the list of things to do, the only thing I didnt do, was wire in a cig lighter socket for the TomTom, I've bought it, just didnt get around to wiring it in - but can do that tomorrow
Cool. Hope mapping goes well for you :)