Printable View
Not alot of progress in the last couple of months . But just got alot of my parts back from the machine shop.and a few bits have turned up in the post .
Im ordering all the final bits this week coming so watch this space .https://uploads.tapatalk-cdn.com/201...63c3e53b2d.jpghttps://uploads.tapatalk-cdn.com/201...ded57134ac.jpg
Sent from my EVA-L09 using Tapatalk
Shame to hide all this lushness under a bonnet. :d
Looking sweet mate [emoji1362]
Sent from my iPhone using Tapatalk
Absolutely love that! Rather jealous of that front end
Brand new omex ecu and 50mm dv arrived yesterday .been and welded the dv today .and spending the weekend wiring the motor up .https://uploads.tapatalk-cdn.com/201...2aa585ccfa.jpghttps://uploads.tapatalk-cdn.com/201...31a1f3cb0d.jpghttps://uploads.tapatalk-cdn.com/201...b4e68e94ab.jpg
Sent from my EVA-L09 using Tapatalk
Also anyone know what is the best coilpack to use without going seprate coils
Christ this looks fantastic!
Cheers pal its coming along now but its been a long drawn
out process . Cant wait to hear it run now
i bet and drive it too. Will be a better drive i'd think.
Use the zlet coil pack
Sent from my iPhone using Tapatalk
Mock up all done everything seams to fit were it should now .
Time to fit the flywheel and cg motorsport paddle clutchhttps://uploads.tapatalk-cdn.com/201...83f4469ff8.jpghttps://uploads.tapatalk-cdn.com/201...6635f4439d.jpg
Sent from my EVA-L09 using Tapatalk
Looking like a proper monster that !
You got one for me mate?Quote:
Originally Posted by heds
I plan to go honda coils once I get my big inlet made but getting a bit close to season now to start messing about again so going to get the car set up and reliable then . Do the rest of the stuff I need to end of season .
I need to learn how to drive it again aswell lol
I haven’t mate sorry
Sent from my iPhone using Tapatalk
So I have been getting on with loads on the car but nothing worth posting . Now time to start wiring everything in though so soon hopefully will be able to fire it up for the first time. Didnt realise I had to remove the locking plate off the front of the plug . Spent an hour trying to get even one of the auxillary loom pins in . Not a chance lol https://uploads.tapatalk-cdn.com/201...3007924dc8.jpghttps://uploads.tapatalk-cdn.com/201...6af881dd5d.jpghttps://uploads.tapatalk-cdn.com/201...84fb652f3c.jpg
Sent from my EVA-L09 using Tapatalk
I'm going to be using an aftermarket ecu, this is the part I'm least looking forward to in the build, although I have the promise of help from a friend who has done it before.
Good luck.
Strut tops arrived today from nova_mike cheers mate.https://uploads.tapatalk-cdn.com/201...86f631de9f.jpghttps://uploads.tapatalk-cdn.com/201...ac54accc73.jpg
Sent from my EVA-L09 using Tapatalk
Couple more bits to the puzzle
Ecu holder I have made to fit omex
And a new compbrake header tank relocated to suit my new rear coolant pipe I hope to make . Also keeping the gearbox area clear ready for bigger turbo mounted above the box next year .
Going to make the whole rear coolant pipe and silicone hose part out of alloy to keep everything neater https://uploads.tapatalk-cdn.com/201...cc888ccc13.jpghttps://uploads.tapatalk-cdn.com/201...2d32277c39.jpghttps://uploads.tapatalk-cdn.com/201...163fdee87f.jpghttps://uploads.tapatalk-cdn.com/201...0c1c2c6a26.jpg
Sent from my EVA-L09 using Tapatalk
I'm sooooooooooo gonna sex wee on that! lol
The standard inlet is going to be the killer of any decent power curve :(
Yea its going mate its only on there to get the car up and running and a few run in runs . I have a new one in my van ready do cut up and have welded to an evo style after market big plenum . The standard inlet will only handle around 520hp before it starts to choke the motor.
It's the curve across the rpm I mean - rest looks really really good.
Omex air temp sensor and map sensor arrived today along with the t bar boost clamps .
Also can anyone see any problems with coolent flow etc before I go ahead and get them. Made . You can sort of see how iv mocked it up . The side head hose will be a 90° straight off and down into the top of the alloy piping and the header hose will be as shown ??
https://uploads.tapatalk-cdn.com/201...a633674827.jpghttps://uploads.tapatalk-cdn.com/201...62ca2146f4.jpg
Sent from my EVA-L09 using Tapatalk
I have been meaning to make a start on my new inlet for a while now so with not much more to do to the car I thought id make a start.
Im going to join this to an evo aftermarket big plenum and then use the v6tbhttps://uploads.tapatalk-cdn.com/201...bb9cd2d5a3.jpghttps://uploads.tapatalk-cdn.com/201...cda968ff0d.jpghttps://uploads.tapatalk-cdn.com/201...4e31e525cb.jpghttps://uploads.tapatalk-cdn.com/201...bc03fdfbed.jpg
Sent from my EVA-L09 using Tapatalk
Nud has been round today and worked his magic with some more of the loom looks a top job . Most of the plugs are on now only a couple of 2 pin ones I forgot to order.
Loom wrapped in fabric loom tape for that retro look.https://uploads.tapatalk-cdn.com/201...8bb13fc0ff.jpg
Sent from my EVA-L09 using Tapatalk
Looking well mate.
Looks bloody good, love that engine bay.
Awesome
Anything like this preferably with full radius ram pipes inside will transform the engine by comparison; GL matey :D
http://www.2040-parts.com/_content/i...154149/001.jpg
Im using one of these seems to be the done thing a few lads I race with use them with very good results . The tbs are shit hence why im using the v6 tb but apart from that the inlets work perfect on the lethttps://uploads.tapatalk-cdn.com/201...a3c6bc5bd8.jpgQuote:
Originally Posted by BRoadGhost
Sent from my EVA-L09 using Tapatalk
875cchttps://uploads.tapatalk-cdn.com/201...18ca2b0b07.jpg
Sent from my EVA-L09 using Tapatalk
Design looks near perfect!
The evo port centers are about perfect to let ones so should be pritty easy to match uphttps://uploads.tapatalk-cdn.com/201...c71e63b397.jpg
Sent from my EVA-L09 using Tapatalk
After being unable to choose a pair of wheels I liked for the front . And then eventualy finding somthing that would have worked and looked spot on I was told that the company would only sell a set of 4 no good when I only need two even though there site had them listed seperatly . I decided to have a pair of 15" steels banded
Thet have been banded by alonze customs in scarborough who have done an unreal job on them for a very good price.https://uploads.tapatalk-cdn.com/201...f768bf270f.jpghttps://uploads.tapatalk-cdn.com/201...3f06e3a36f.jpg
Sent from my EVA-L09 using Tapatalk
They look really nice.
A bit of paint has transformed these wheels.https://uploads.tapatalk-cdn.com/201...738430b7ee.jpghttps://uploads.tapatalk-cdn.com/201...9411bc0003.jpghttps://uploads.tapatalk-cdn.com/201...ad38ca1270.jpg
Sent from my EVA-L09 using Tapatalk
Final coat of clear https://uploads.tapatalk-cdn.com/201...b3e6741967.jpg
Sent from my EVA-L09 using Tapatalk
New boots on and some fresh airhttps://uploads.tapatalk-cdn.com/201...ebbd6a30f8.jpghttps://uploads.tapatalk-cdn.com/201...a40b2041a5.jpghttps://uploads.tapatalk-cdn.com/201...bf0192189b.jpghttps://uploads.tapatalk-cdn.com/201...66b00dba2a.jpghttps://uploads.tapatalk-cdn.com/201...7eced4bbab.jpg
Sent from my EVA-L09 using Tapatalk
Loving this mate great work !:thumb:
Holy feck! That looks awesome.