Quote:
Originally Posted by nova1992
Show her some back seat action ;) that should shut her up lol
Printable View
Quote:
Originally Posted by nova1992
Show her some back seat action ;) that should shut her up lol
lollollol I will give it a go buddy and post the results. :thumb:Quote:
Originally Posted by Vauxhall-Scotland
Include some pics off the missus :thumb: :pQuote:
Originally Posted by nova1992
Women always say that. My wife thinks I'm crazy, she doesn't understand why the Nova interests me (and us) so much. When she saw PNG she thought that we were all fappin' mad. I kept telling her that I was rather sane in the mad world of PNG lol
Now that my car is in the motion of getting bodywork and a conversion done she's started to change her tune and I know for a fact that she'll end up wanting to drive the Nova more than her car when the LET goes in lol
Will do, Currently trying to get her to do a nova-shoot ha. At the moment fat chance of that happening.
:thumb:Quote:
Originally Posted by nova1992
Pretty much same as the misses thinks here. "Well its just a car" i show her projects "Its got no door." I did try to show her some proper projects with nothing but a rusty shell. There is no understandment with her. :wtf:Quote:
Originally Posted by Nova_Tek
^ She thought I was loony when I said that I wanted a 2litre turbo. She said 'if 1.2 isn't enough put a 1.4 or 1.6 in' :wtf:
Then I showed and explained to her what David is planning to do 3.2 V6 Turbo and she said 'ok put the 2 litre in but don't go any bigger' lol
Small update.
New Airfilter Fitted.
New Magnex Backbox (Not yet fitted)
http://photos-e.ak.fbcdn.net/hphotos..._4374770_n.jpg
http://photos-f.ak.fbcdn.net/hphotos..._1873465_n.jpg
http://photos-h.ak.fbcdn.net/hphotos...2_123307_n.jpg
Whats the best way of fitting backbox? Just jack up on axle stands unbolt old one and bolt straight back on?
You might need some reducer pipes or sleeves I think their called...My Magnex bore was slightly bigger than my standard exhaust bore so a wee sleeve was made up to reduce the Magnex bore to go into the standard bore...Like a cone shape if that makes sense...
Bigger at one end than it is at the other... lol
Good choice of backbox, can't argue with a 3" tailpipe on a Nova.
WTF is that green pipe on the airfilter
Crank breather isnt it?Quote:
Originally Posted by General Baxter
Tempary i must pop down to the motors shop to pick up a decent set of pipe's all pipes are sealed so it isnt bodged :DQuote:
Originally Posted by General Baxter
Yeah I didn't want nothing to big and loud, just want something to perk it up a little. Plus its SHINEY! :cool:Quote:
Originally Posted by muzzy
Looking good son,
Bet you cant wait till your driving this on the road :)
I have been out a few times, but with the old man, As soon as im on the road ill take her out for a decent drive down a nice road. Hopfully she wont die on me. :)
+ An update i forgot i got a new key barrel trim ha.
It won't die as long as it's well looked after and well maintained :) Don't knock it's c*nt in either and it'll serve you well :thumb:
Im not going to be a prat like a certain chav around my area, Has a baby blue nova. He has no front bumper. it did look quite nice but he has totally ruined it :(
lololol, niceeeee
Oh Curt i give you +1 rep for the bits buddy
thankiees lol
Didnt know Jack lived near you lol lol lolQuote:
Originally Posted by nova1992
(sorry Jack)
Ha, nah i know the fella. Its quite upsetting really. I don't people having a nova but if you have it on the road you must look after it am i correct?
yes, unless you want to end up scrapping it next time the MOT is due lol
New Gear Gaitor Fitted Today, Bought it and it looked grey, got it and it was black was very happy :)
grrrrrr, grrrrrrrr, grrrrrr lol nice work
how hard was it to remove the gear nob?
ahaha, If it was grey i would hae given it to you curt :)
Was easy, popped the whole stick out the car, Then submerged knob in just under boiling water, Then waited a few minutes and popped it off.
Gear knob is a piece of p*ss to take off.
Get a block of wood, put it under the knob flat against the gear stick shaft and with a hammer tap up. This will push the gear knob off the gear stick.
Done it to mine and it took me all of 1 mintue to remove it like that.
lol i just got a heat gun on it and mine came off
also made it shiney :)
i broke my heat gun, It melted while i was stripping stickers off a van.
How ironic. lol, a heatgun melting itself pmsl.Quote:
Originally Posted by nova1992
After a lowering kit if anyone has 1 for sale, 40-60mm Thanks.
dont bother with -40mm springs on 15" alloys
sits way to high i got fed up with mine and just cut the standard springs:cool:
connor
What you mean cut standard springs?
It's a bodge cutting springs mate lol
Save up and keep a look out for -60mm kit :)
LOL @ melting the heat gun. Don't cut the springs either, you can pick up springs on they're own or a shock/spring kit for pretty cheap now.
Muzzy i doubt ill cut them :roll: Bit bodgy to be honest.
Anyway had a few little jobs done on the car today :)
Sprayed Door Key Barrel Trims Gloss Black :)
http://i799.photobucket.com/albums/y...e/DSCF2037.jpg
Sprayed Boot Handle (Will wet and dry then respray due to texture)
http://i799.photobucket.com/albums/y...e/DSCF2038.jpg
Remains of my center pipe....
http://i799.photobucket.com/albums/y...e/DSCF2042.jpg
Boot Handle On (Need to do light of bumper and handle button)
http://i799.photobucket.com/albums/y...e/DSCF2049.jpg
And of course girls...
http://i799.photobucket.com/albums/y...g?t=1269199598
how did you get the key trims off
good looking women there;)
connor