red/blue goes to the gearbox transducer if my mermory is correct. black / white left indicator warning lamp, white/ yellow lights on lamp warning lamp
Printable View
red/blue goes to the gearbox transducer if my mermory is correct. black / white left indicator warning lamp, white/ yellow lights on lamp warning lamp
black/white -left indicator (wire to stalk) unless its black/white/green then you leave that blank!
yellow/white-headlights (to switch)
red/blue is to the transducer
hey guys, jus finished wiring my digi in,
another thing,
if you are weary about cutting the green wire to your ignition coil, just unplug the black plug from your ignition coil, and wrap the wire from the digi (green wire) around the correct spade, then put the black plug back in, and it saves cutting it, works fine, tis how i done it,
Just a quick one, what exactly does the yellow and white to the headlight switch do?
a complete and utter guess (without having a look ;)) interior light when you pull the switch out??
when you put the headlights on a little symbol comes on the bottom of the digi to warn you the headlights are on.Quote:
Originally Posted by w88rdy
so much for my guess LOL
good article BTW
what are these dahes like in bright sunlight?
Is it the same idea when wiring a digidash into a mk1?
Or can you not wire a digidash into a mk1?
same wiring but needs a bit chopping on the dashboard to fit the mk1.Quote:
Originally Posted by DMcBXE
There fine mateQuote:
Originally Posted by Steve0011
I fitted my Digidash using this guide and found that the standard transducer on my 1.2i loom works the digidash and it got me thinking...
...Does any SPI transducer work a digidash ? Depending what setting you have the red switch at the top set to
Mine reads 125 when you put ignition on but I've seen some reading 127